Just a thought, but does anybody besides me think it might help our vaping cause if somber even one of these organizations like CASAA would put out some positive infomercial on Vaping. Kinda like a Vaper talking to a smoker about there journey to being smoke free and how good they now feel. ?? As I said just a thought I had and thought I would share.
I don't know what the lack of positive info is about Kaz. Going to have to ask on a separate Thread and see what comes to light.
Very good point though
I don't know what the lack of positive info is about Kaz. Going to have to ask on a separate Thread and see what comes to light.
Will do Kaz, I posted it as a separate Thread to see what others way in on the topic and see if it leads me to other areas or folks that might even lead to an answer or just maybe some Media that our side of things has lacked
Anyway the only stupid question is the one that isn't asked and not known
Dunno, but since cig commercials are banned, could be that's a problem. They'd have to mention smoking.
Valid point there gary, however don't they have Chantex commercials or Nicolette gum commercials?? And I can't recall the commercials exactly but I would think they have to mention smoking at some point??
Will do Kaz, I posted it as a separate Thread to see what others way in on the topic and see if it leads me to other areas or folks that might even lead to an answer or just maybe some Media that our side of things has lacked
I'm pretty sure you can't go that low with a BB. Bret Ohman, who makes the Kangaroo, said not to use anything below 1.2 ohms on the Rev3. There's a new BB, though, the Rev4, that has a DNA40 board in it, and it can go sub ohm, TC, blah blah
. Don't have one, yet ...
Yup. They do, but who's really behind them? Big pharma and BT have a pile of money for the lobbyists to throw around.
Valid point there gary, however don't they have Chantex commercials or Nicolette gum commercials?? And I can't recall the commercials exactly but I would think they have to mention smoking at some point??
But a valid point to ponder none the less
.
I'm pretty sure you can't go that low with a BB. Bret Ohman, who makes the Kangaroo, said not to use anything below 1.2 ohms on the Rev3. There's a new BB, though, the Rev4, that has a DNA40 board in it, and it can go sub ohm, TC, blah blah
I'm getting better, but I still rarely go above 0.6Ω. Too much time playing around in the 0.2-0.3Ω range I guess.
I know. When I was building for my squonkers, my typical build was dual coils, .4 ohms. Sometimes .5. Now I mostly build in the 1.2-1.5 range, perfect for my tootle puffing waysWell, that stinks. The 0.9Ω Kanthal cCells are the highest resistance available for those heads. I guess I'm so used to mechanical mods that I hardly consider 0.9Ω to even be sub-ohm any more.
I'm pretty sure you can't go that low with a BB. Bret Ohman, who makes the Kangaroo, said not to use anything below 1.2 ohms on the Rev3. There's a new BB, though, the Rev4, that has a DNA40 board in it, and it can go sub ohm, TC, blah blah
I know. When I was building for my squonkers, my typical build was dual coils, .4 ohms. Sometimes .5. Now I mostly build in the 1.2-1.5 range, perfect for my tootle puffing ways
Oh. I did, PS and BTW, say "yet"....
Ok, then. 'Cept for the "just" part!Sorry... a potentiometer is the little wheel that you turn to increase or decrease the voltage output. It is a type of analog voltage regulator. Sometimes my electronics background makes me forget to explain things.
