Post pictures of your working wick and coil setup

[SLIPPY_EEL]

I havent rigged a single coil in a while...
22g A1 kanthal
3/32 ID
0.25Ω
heats up super fast & vapes great

 

[DeadbeatJeff]

not my build, but I saw it on FB and am gonna attempt it soon.

"This is a 32 over 28 gauge Clapton wrapped 5 times parallel with a piece of 24 gauge .3 ohms, 3/32 ID."





I just thought it was sexy enough to share

 

[Tbev]

Nice, this thread sure is falling asleep huh....? Keep it alive deadbeat!

 

[NikZak]

I'm planning a quad coil vertical build in my 30mm Tobh later tonight, I'll be sure to take some pictures and keep this thread kicking

 

[Tbev]

I got all my attys ripping right where I like em so I haven't been building much...

 

[Tbev]

I just rewicked with rayon after running 120ml of Custard thru the same wicks! Rayon of course.
Twisted 28ga @0.33ohm.

If you haven't tried rayon, go ask for some inure rayon thread. No worries, we'll hook you up.
If you haven't used or purchased a BCV product, your missing out!
Let's get this thread back up to speed!

 

[TheKiwi]

What's BCV :O


Burping out loud using Tapatalk

 

[Tbev]

Bay City vapor, XXIX and SR

 

[FictitiousFreedom]

Sent from my PC36100 using Tapatalk 2

 

[FLExJuice]

not my build, but I saw it on FB and am gonna attempt it soon.

"This is a 32 over 28 gauge Clapton wrapped 5 times parallel with a piece of 24 gauge .3 ohms, 3/32 ID."

I just thought it was sexy enough to share

I hope to be that good one day.

Here's my first big boy attempt at dual coils (0.7ohms)

 

[Tbev]

Try some parallel coils, they are my favorite and pretty easy to do.

 

[FictitiousFreedom]

Not bad at all for your first attempt. Takes most people months to get them even somewhat symmetrical.

Sent from my PC36100 using Tapatalk 2

 

[Tbev]

Agreed, very well done.. That's why I was pushing parallel coil, you word do just fine!

 

[laurie9300]

I've been experimenting with my "Double Barrel" coils in the Kayfun. I have been trying to increase the resistance for use with my VW devices. I went from 20g to 18g to 1.3mm........

This one is........

30g - 12 wraps - 2mm - 1.2ohms - Rayon

 

[juggalofisher88]

Dual triple parallel 28g sheisdio cotton

Quad parallel 28g sheisdio

Quad .8x.1mm ribbon KGD cotton

That's all for this last weeks builds that worked lol

 

[jonny45378]

Nothing special just a dual 7 wrap coils with 24 gauge @ .34 ohms. But basic works for me


Sent from my SM-N900T using Tapatalk 2

 

[donuts]

First build ever..
28ga 7 wraps single coil at 0.3ohm

 

[NikZak]

Sorry about the delay folks, but here's that Quad coil I promised

Took a bit of fiddling especially in the center post to get 4 28ga wires through the tiny hole, need to work out a way to drill or just build with 30 or 32 ga wires from now on in it

Enjoy my pic dump

 

[juggalofisher88]

Sorry about the delay folks, but here's that Quad coil I promised

Took a bit of fiddling especially in the center post to get 4 28ga wires through the tiny hole, need to work out a way to drill or just build with 30 or 32 ga wires from now on in it

Enjoy my pic dump

How's she hitting? Looks like a hole gotta cotton that could be dulling flavor and vapor doesn't look like much air can get to em.
Im not familiar with that atty but i successfully drilled my TOBHs post holes to 3/32
But my igoW could only handle 1/16th
Just gotta go one step up at time, and also remember that the post screws are long enough to accommodate.

 

[NikZak]

It hits brilliantly, might change the wicking up when I can be bothered fiddling with it again but it holds an absolute pile of juice (like 30-40 drops)

It's a 30mm Fasttech Tobh with 4 posts (which I'm lead to believe is weird) and the center post's hole is facing two of the posts so no access to drill out the hole really...

I'll just leave it like this as long as possible and get myself something with three posts for building on