stabwood is good

Super Member
ECF Veteran
Oct 17, 2020
510
3,122
Morning shinies :wub:

One of my Abyss's has started draining my batteries right down. Takes about a day and a half but it's at zero volts when it's finished. I've contacted sourcemore and they've asked for a video and pic...that's pretty impossible. They're just going to have to trust me on this o_O:nah:
Any ideas??

Have a great day everyone :wub:

I hope it’s not like what happened to my Techmod. My Techmod was worse - two hours and the battery was drained. I left a battery in, and it shorted overnight and was dead the next day. :cry:
 

stabwood is good

Super Member
ECF Veteran
Oct 17, 2020
510
3,122
I hope it’s not like what happened to my Techmod. My Techmod was worse - two hours and the battery was drained. I left a fresh battery in, and it shorted overnight and the mod was dead the next day. I could spell the burned chip. :cry:
 

stabwood is good

Super Member
ECF Veteran
Oct 17, 2020
510
3,122
I was a young kid...
I had dreams...
I had hopes...
I wanted a normal life...

And then...peer pressure,the Dvarw Posse sunk its claws into and this happened:

View attachment 946853

I hate you...you took my youth,good looks and awesome looking hair from me.
All i have left is my green eyes and a hunk of metal with an ugly white drip tip on it.

All kidding aside,not bad.

Nice restrictive draw,kept the inner deck thingy as is,didn't use any from the baggy that came with the atty.

Putting the cotton in was less of a hassle than i thought,i did get some leaking but that is probably my fault.
Will get better once i wick it more often,apart from that it is a pretty good atomizer,shame i don't have any drip tips that fit...should have ordered some at the same time i ordered the atomizer but oh well,no biggie.

P.S: Gee my desk is dusty,gotta clean my desk lol

P.S.2: Still no idea how this works:

$7.22 Replacement Tank Kit for Dvarw DL V3 RTA Atomizer - 6ml at FastTech - Free Shipping

Says it is for top fill but can't seem to figure it out,chimney looks different than the one that came with the atty.

I had the same problem trying to figure it out. I wish it came with diagrams of how it’s supposed to function. Even searched YT for any videos but no luck. @Pigs gave some useful info. :thumb:
 

stabwood is good

Super Member
ECF Veteran
Oct 17, 2020
510
3,122
@Pigs @charlie1465 and @NolaMel are the experts on rbas for billet box style mods, like your Abyss and Boxx.

But if you want more air than the Ether rba, there's a few different options for another rba.

My guess is the:
$25.90 SXK MOBB Mini Styled RBA Rebuildable Atomizer for Billet / BB / Supbox / Bantam Revision - w/ 3.5mm air pin at FastTech - Free Shipping
will be more your style.

There's also this one:
$22.90 SXK Exocet V2 Styled RBA Deck for Billet Box/SXK BB/SXK Supbox Box Kit - 316 stainless steel at FastTech - Free Shipping

But I'm not sure if there are any restrictions on what rbas you can use in the Abyss tank. So you pros above ^ need to chime in :thumbs:

The Mobb looks interesting. It looks like it’s got grooves that add side airflow to add to the bottom. Can anyone confirm that it works with the Abyss?
 

stabwood is good

Super Member
ECF Veteran
Oct 17, 2020
510
3,122
Last edited:

stabwood is good

Super Member
ECF Veteran
Oct 17, 2020
510
3,122
New and not so new :

DSCF9072.JPG


Yihi SX-Mini SL with a Steam Crave Aromamizer Supreme V3. Initially, I was let down by the Aromamizer. Juices were muted with even a hint of burnt cotton. I was really disappointed because I based my purchase on several YTers' rave reviews, even claiming the AS V3 was their RDTA of the year. After about the third refill, I took it apart to re-wick. Glowing the coil to burn the gunk, I saw my rookie mistake - several HUGE hotspots I never strummed out. Well, I did that, and re-wicked - and let me just say, it's like I can taste the individual flavors in my juice. I would almost say, I can even taste the brand of flavor. Whew! Now I don't regret I bought a black and gunmetal too. :headbang: :lol:
 

hittman

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Contest Winner!
  • Jul 13, 2009
    62,683
    183,779
    Somewhere between here and there
    A few people on the LV Fb page are already rocking them. EV has them but the black and gm are already sold out. It certainly is a sweet offering. If I didn't already have two Therions (and two Paranormals) in great shape, I'd definitely go for the gunmetal one.

    I have the Thelema in gunmetal already but would love the have the black. I really like the doors for that one. I have seen people on FB with them also.
     

    Pigs

    Vaping
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    The Mobb looks interesting. It looks like it’s got grooves that add side airflow to add to the bottom. Can anyone confirm that it works with the Abyss?
    Hey there @stabwood is good !
    What look like they might be side airflows on the Mobb Mini are part of the wicking channels. Made of PEEK, they supposedly help with wick flow. It sure does wick well and fast.

    I haven't tried my Mobb Mini in the Abyss yet but it should work fine. The Abyss tank has the same diameter bottom (510/ af connector) and top (chimney) holes as a Boro tank. Let me know if it's a deciding factor for you to buy one. If so I'll put it in the Abysss tank and see how it goes.
     

    stabwood is good

    Super Member
    ECF Veteran
    Oct 17, 2020
    510
    3,122
    Hey there @stabwood is good !
    What look like they might be side airflows on the Mobb Mini are part of the wicking channels. Made of PEEK, they supposedly help with wick flow. It sure does wick well and fast.

    I haven't tried my Mobb Mini in the Abyss yet but it should work fine. The Abyss tank has the same diameter bottom (510/ af connector) and top (chimney) holes as a Boro tank. Let me know if it's a deciding factor for you to buy one. If so I'll put it in the Abysss tank and see how it goes.

    Thanks. This group sure is a library of knowledge. Haha. :headbang: I forget if you had the Ether RBA but if you do, could you compare the two for flavor and efficiency of wicking?
     

    chanelvaps

    ECF Guru
    ECF Veteran
    Verified Member
    Oct 3, 2013
    16,074
    85,478
    Burbank CAlifornia
    New and not so new :

    View attachment 946983

    Yihi SX-Mini SL with a Steam Crave Aromamizer Supreme V3. Initially, I was let down by the Aromamizer. Juices were muted with even a hint of burnt cotton. I was really disappointed because I based my purchase on several YTers' rave reviews, even claiming the AS V3 was their RDTA of the year. After about the third refill, I took it apart to re-wick. Glowing the coil to burn the gunk, I saw my rookie mistake - several HUGE hotspots I never strummed out. Well, I did that, and re-wicked - and let me just say, it's like I can taste the individual flavors in my juice. I would almost say, I can even taste the brand of flavor. Whew! Now I don't regret I bought a black and gunmetal too. :headbang: :lol:
    I am still rocking the V2 but I might have to go get one
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,557
    89,958
    New Zealand

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,557
    89,958
    New Zealand
    Since my podmod craze, which is thankfully abating, :oops:
    I've had one unexpected benefit. I'm rewicking my Dvarws a lot less. It used to be every 2-3 days, now it's every 4-5 days. And I'm vaping them the same amount of time.

    The only difference is when I come inside and need nicotine and need it now! I grab a Kroma Z or an Aegis Plus, and chain vape RDL until I'm human again or head spinny (same strength juice I usually MTL).

    And @hittman and @bigbob2322 I finally tried the 0.4ohm coil in Aegis Boost Plus. The 0.6 was good flavour, just a tad too restricted. The 0.4 has much, much better flavour and smoothness wide-open. I'm going to need more of them :thumbs:
     

    Pigs

    Vaping
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    Thanks. This group sure is a library of knowledge. Haha. :headbang: I forget if you had the Ether RBA but if you do, could you compare the two for flavor and efficiency of wicking?
    Will do. So far I haven't had any dry hits or leaking with either. The flavour I'm getting from the Mobb (in a Boro/Boxx) tops the Ether the way I have them setup. Both using little Ni80 fused claptons around 0.5 Ohms at around 25W. 3mm ID in the Ether and 2.5 in the Mobb. I'll try 2.5 in both in the Abyss tank to get a better comparison.
     

    Users who are viewing this thread