The Lethal is open for business!!! I used a combo of the advice given here and was finally able to rotate the afc ring to fully open. At least appears as fully open.
but it was very messy even holding the tank upside down the juice from the deck got everywhere. Sticky fingers are the only thing I dislike about vaping but you can’t get away from a bit of juice on your hands from time to time. I have a chronic issue to sticky things on my hands. Not great for someone who vapes and especially one who mixes juice
!!!
so thanks everyone. It was a silly issue lol! I felt like a noobie and am a bit embarrassed
! So let’s as a group forget this moment lol!
It’s a lot more of a restricted DL than I thought it would be but I’m okay with it. Certain flavors come out better with less air like bakery juices imo anyways. I think if it was slightly more restricted I wouldn’t like it. But it’s a nice smooth rDL.
Here it is on top of an Asmodus Amighty and if you can find one Id advise anyone to buy one. It’s a sturdy mod and looks and works great. And of course I have two because as we all know I buy at least two of any hardware gear I like !!
And the wicking is spot on without any leakage or seeping. I almost ALWAYS watch 2 to 3 build videos from a few select reviewers prior to building any new RBA. I think it’s made my building much better right from the get go.
but it was very messy even holding the tank upside down the juice from the deck got everywhere. Sticky fingers are the only thing I dislike about vaping but you can’t get away from a bit of juice on your hands from time to time. I have a chronic issue to sticky things on my hands. Not great for someone who vapes and especially one who mixes juice
!!!so thanks everyone. It was a silly issue lol! I felt like a noobie and am a bit embarrassed
! So let’s as a group forget this moment lol!It’s a lot more of a restricted DL than I thought it would be but I’m okay with it. Certain flavors come out better with less air like bakery juices imo anyways. I think if it was slightly more restricted I wouldn’t like it. But it’s a nice smooth rDL.
Here it is on top of an Asmodus Amighty and if you can find one Id advise anyone to buy one. It’s a sturdy mod and looks and works great. And of course I have two because as we all know I buy at least two of any hardware gear I like
!!And the wicking is spot on without any leakage or seeping. I almost ALWAYS watch 2 to 3 build videos from a few select reviewers prior to building any new RBA. I think it’s made my building much better right from the get go.
Last edited:
Finally ordered the SXK Mission XV Orbit from 3F
Buy SXK Mission XV Style Orbit RBA for Billet / SXK BB / Boro Mod Kit
My first new toy in a while - very excited. Hopefully will get it before Easter
That’s a crazy looking RBA!!! I hope enjoy it and that it arrives in a timely manner.
Thanks. Looks like the Mission XV people took the airflow design from Svoemesto's AEROKON system. There's a cone shaped plug that you spin to either increase or decrease the amount of af in a constant curve so you can really fine tune it to how you like it.
With the Orbit that goes from fully closed all the way up to 4.5mm which is a lot of air for a boro RBA.
The deck is also very open and designed for relatively big coils.
I think @Truckin Vaper has one of the authentic versions (plus a ton of other BB RBAs!) so he might be able to tell us how well it works.
Finally Vape Mail shiny gear from 3F and Fasttech has arrived!
Im very excited about the Rainbow Dead Rabbit V3! Plus lots of different colors 810 drip tips and enough pre made coils to last a lifetime.
Im very excited about the Rainbow Dead Rabbit V3! Plus lots of different colors 810 drip tips and enough pre made coils to last a lifetime.
Yup! The first fill I didn't bother and I watched eager beaverly for it to flood everywhere. It didn't, so I just carried on.
I did discover this morning that the AFC ring is pretty bloody tight to turn the first time! I used rubber gloves
The Lethal is open for business!!! I used a combo of the advice given here and was finally able to rotate the afc ring to fully open. At least appears as fully open.
but it was very messy even holding the tank upside down the juice from the deck got everywhere. Sticky fingers are the only thing I dislike about vaping but you can’t get away from a bit of juice on your hands from time to time. I have a chronic issue to sticky things on my hands. Not great for someone who vapes and especially one who mixes juice
so thanks everyone. It was a silly issue lol! I felt like a noobie and am a bit embarrassed
It’s a lot more of a restricted DL than I thought it would be but I’m okay with it. Certain flavors come out better with less air like bakery juices imo anyways. I think if it was slightly more restricted I wouldn’t like it. But it’s a nice smooth rDL.
Here it is on top of an Asmodus Amighty and if you can find one Id advise anyone to buy one. It’s a sturdy mod and looks and works great. And of course I have two because as we all know I buy at least two of any hardware gear I like
And the wicking is spot on without any leakage or seeping. I almost ALWAYS watch 2 to 3 build videos from a few select reviewers prior to building any new RBA. I think it’s made my building much better right from the get go.
View attachment 965699
I'm very very glad that like @Letitia you like it enough not to throw it out the window! From now on, I'm only going to be the guinea pig for very inexpensive attys.
What insert did you use?
At this stage, I still want to get the Pulse AIO as my first - due to the price and that it comes with the Pulse rba which I love the look of.
And I'm tempted with the £40 nautilus Boxx from Cheeky Vapes. But I can get the qbix rba here for their price on that. What I want to try first in the Boxx if i do go there, is the Pulse rba or the Orbit rba - I love the look of that airflow design.
I got some vape mail tonight. It’s review samples but shiny nonetheless. I got both of the new Dovpo tanks and the Freemax Maxus 168. I haven’t opened anything but will share pics once I take some.
Got me one to mate...shipping only $1 somethingFinally ordered the SXK Mission XV Orbit from 3F
Buy SXK Mission XV Style Orbit RBA for Billet / SXK BB / Boro Mod Kit
My first new toy in a while - very excited. Hopefully will get it before Easter
Got high hopes for it to. I'll use it on the Billet box first, and talk to you later about other mod options.
But as you say it'll take a while....I took the Chinese post option
Last edited:
Yup! The first fill I didn't bother and I watched eager beaverly for it to flood everywhere. It didn't, so I just carried on.
I did discover this morning that the AFC ring is pretty bloody tight to turn the first time! I used rubber gloves
what RBA is this? Is it the Lethal?
Lol! At $55 bucks no way it was going out any window lol!I just needed a time out because I was getTing ticked off
!but I did end up removing it from the mod cuz juice was everywhere. Then I used a rubber gripper to hold the tank and a coil tool to hold the afc ring firmly.
It was aggravating but it finally became loose. I dare not try to move afc ring because then it may end up out a window lol
! I THINK it’s wide open but I’m not so sure. There maybe a bit more movement to lessen the restriction but I’m leaving it alone for awhile.
Last edited:
whats the build you’re using. I’ve got a great selection of Ni80 and SS316 prebuilt coils to use but not sure what one to go with.
I’m using two ni80 coils. Some kind of Clapton that were .35 ohm each coming out to .18 installed. 51 watts is a good spot for me.
I used which ever had the more airflow. I can’t remember which one it is. Was there slotted one? If so then that’s the one I used. Two holes was way to restricted for me.
I’m just glad I can use it it now because it’s a very smooth flavorful atty. I wish the had the stainless steel available. Does Fasttech carry a clone? I’m useless trying to do a Search on FT.
Last edited:
Similar threads
- Locked
