Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

[dwcraig1]

RE: GG to Oddy conversion kit. Has anyone mentioned why this is going to be even better than a real kayfun? Liquid control, it adjusts in the same way to Term does, by twisting the mouthpiece. I missed the list by a day cause I couldn't figure how to registrar on the forum due to my lacking Polish skills. It appears to have an adjustable air flow as well via a small screw in the positive post. I want one.


I have since registered btw

 

[b0redagain]

I want one...hopefully there will be a new list soon.

 

[Technonut]

RE: GG to Oddy conversion kit. Has anyone mentioned why this is going to be even better than a real kayfun? Liquid control, it adjusts in the same way to Term does, by twisting the mouthpiece. I missed the list by a day cause I couldn't figure how to registrar on the forum due to my lacking Polish skills. It appears to have an adjustable air flow as well via a small screw in the positive post. I want one.


I have since registered btw

I don't have a Kayfun, but watched reviews, and like the design. This add-on should replicate much of the Kayfun experience. The primary draw to me is not having to fool with making NR / R wire coils.. Also the fact that the Terminator's wide mouthpiece base can impede juice flow at times.. This add-on will not.

 

[upsetter21]

I'm 3rd on the 2nd production list & asked for two komplete kits. I CAN'T WAIT!!!
The MKB, Terminator, Oddy, Kayfun all integrated!
It's like an All-star Vape!

 

[Technonut]

I'm 3rd on the 2nd production list & asked for two komplete kits. I CAN'T WAIT!!!
The MKB, Terminator, Oddy, Kayfun all integrated!
It's like an All-star Vape!

It's been exciting times for me in the vaping world recently. I've had many high-end mods over the years. With the exception of the cig'a'likes and eGos I first used, and the Sigelei Zmax, I have never been attracted to Chinese mass-produced mods. I appreciate quality construction, and was floored with the machinie work of first Terminator I purchased. I was very pleased with the price as well. The MKB-TS followed suit, and is a keeper also.

It's great fun piecing together a quality vaping system at these prices...

 

[b0redagain]

I'm 3rd on the 2nd production list & asked for two komplete kits. I CAN'T WAIT!!!
The MKB, Terminator, Oddy, Kayfun all integrated!
It's like an All-star Vape!

Is the 2nd list still open?

 

[UA72Riddle]

I made it....I think I'm number 120 or something like that, but on it regardless.

I only had one at first....then it hit me how many times I have regretted not getting a second one....so I changed to two full kits and all the spares....can't wait for it!

(And btw, yeah, I have mentioned a few times in a few places why I would rather have this as an add on instead of a regular Kayfun...and that being the integration to my terms and the juice control. )

 

[tj98_7]

I made it....I think I'm number 120 or something like that, but on it regardless.

I only had one at first....then it hit me how many times I have regretted not getting a second one....so I changed to two full kits and all the spares....can't wait for it!

(And btw, yeah, I have mentioned a few times in a few places why I would rather have this as an add on instead of a regular Kayfun...and that being the integration to my terms and the juice control. )

So how did you get on the list for the second production. I registered on the polish forum earlier this morning and sent Vochu a pm and haven't heard anything. Did I do something wrong. Please help. I want one so bad!!!!!!

 

[bsidb]

With the MT closed, no leaks. When you say 1 turn, is that 1 full rotation? Or just 1 small turn? Just got done rebuilding another coil and still got leaking when I opened up the MT half a full rotation. Am I opening it too much?

As far as the nr-r-nr...I just use this method, better than twisting them. Almost like tying a knot.
https://www.youtube.com/watch?v=v5W6L7ZsClQ

this'll be my new tieing tecnique

 

[dwcraig1]

I sent my Kayfun 3.1 packing after 18 days and approx. 40 different wick/coil configurations. It did work really well but couldn't best my Term's but I expect with liquid control that will change. I'm not bad mouthing the Kayfun at all it's just my Terms work really well (Oddy not exactly a Stardust)

Maybe I should add here that I loved the simplicity of re-wicking and filling with the plastic nettled bottle was the cat's a**. And It never leaked a drop.(unless filled from the top)
The machine work is unmatched also on the Kayfun.

 

[UA72Riddle]

So how did you get on the list for the second production. I registered on the polish forum earlier this morning and sent Vochu a pm and haven't heard anything. Did I do something wrong. Please help. I want one so bad!!!!!!

I got on the list at the very beginning of the week.....might have been a little sooner. I think he cut off the list at 145, or something like that...didn't really pay attention.

 

[Ejuice4cig]

Is there a way to make my vape cool? O am running 2 ohms with 3.7v and it get quite hot after chain vape for 20 min :-(

 

[Vego]

If you had the flow-control replacement provided with the GG to Kayfun Conversion Kit - which allows for the use of a 510 drip tip - you could try this:

| Captivape

 

[dwcraig1]

Is there a way to make my vape cool? O am running 2 ohms with 3.7v and it get quite hot after chain vape for 20 min :-(

Maybe it's time to invest in another Terminator or two. LOL

 

[dwcraig1]

If you had the flow-control replacement provided with the GG to Kayfun Conversion Kit - which allows for the use of a 510 drip tip - you could try this:

| Captivape

It can be done with Ithaka parts also

 

[dwcraig1]

And I'm sitting here vaping at 22-24 watts (0.6 ohms) on Ithaka at the moment.
No chain vaping for long with this setup but you get what your looking for on the first drag

 

[Vego]

It can be done with Ithaka parts also

Yeah... and it would probably be easier to get the Ithaka parts than that GG to Kayfun deal.

 

[dwcraig1]

Man that is killing me that I missed the list by one day, I lagged.
That got to be the best thing out there right now, and what a good price.

 

[Vego]

I got what I think is about a .7-.8ohm coil on my new V2 with Ekowool. This is one powerful vape! But one of these days I'm gonna grow some brains and actually measure out the length of the resistance wire section... I wasn't planning on making that low an ohm. I misjudged and ended up with only 2 wraps of 30g... and that was with the joints right snug to the wick. You guys should of seen the way that coil glowed white hot when I tested it. I can't believe I didn't pop it. I need one of those state-of-the-art business card measuring implements like you use, dw... or was that upsetter???

Who's using Nextel (xc116?) in their Term? Any good? Loving the Eko, but I'd like to try the other stuff.

 

[metaltech]

Going back a few posts to joining nr to r wire. I have found a way that works great for me. I use 30 gauge nichrome or kanthal..doesn't matter...and 30 gauge silver nr. what I do is overlap the two wires like im going to twist it. but instead..i wrap the nr around just twice. Next...take a disposable lighter and heat the r wire until its glowing and slowly move flame back and forth until silver wire melts at the joint and that's it. Its like welding the wires together. Very small joint and very strong. I have tugged on the wires as hard as I can and either the silver or the r wire breaks somewhere other than the joint. Extremely stable ohms...even after dry burning. I hope to have some pics or vid up soon to show how I do it cause I think you guys will actually love it..simple and effective.