Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

[Innocuous]

I keep checking the .... discussion, and forever fight with bing AND google for translations as well as being logged in. Very frustrating.

Apparently, I can't even check the list-count url as that got mangled by bing and google as well. Hopefully email will save the universe.

 

[upsetter21]

Innocuous: Google Chrome made the difference for me - it has translation built in. Hope it helps.

PS_ like the avatar... I just watched all of the Firefly episodes in two days (recovering from surgery). Then watched the Serenity movie which I really enjoyed - sad it ended. If you watch Dollhouse 2nd season you'll run into the crazy little sister again. Guess what? She's crazy in Dollhouse too.

 

[tagster]

If I remember right, you should get a pm with payment details when they are close to shipping. I say close, but I think it's been 2 weeks or so since i paid and I haven't received a shipping notice yet.

Just got my tracking info today.

 

[Innocuous]

well, I saw something about only machining 3 dozen pcs a day, and another 14 or so assembled/tested a day.

Maybe the future is a brighter place.

 

[tj98_7]

Yea been waiting on the conversion kit list for a month now. #150

 

[Innocuous]

Innocuous: Google Chrome made the difference for me - it has translation built in. Hope it helps.

PS_ like the avatar... I just watched all of the Firefly episodes in two days (recovering from surgery). Then watched the Serenity movie which I really enjoyed - sad it ended. If you watch Dollhouse 2nd season you'll run into the crazy little sister again. Guess what? She's crazy in Dollhouse too.

Heh.. THey recycled folks from 'Angel' and 'Buffy' as well. I acquired the Serenity movie, subtitles and soundstrack - same with the Firefly series.. I do like the music at work.

 

[Innocuous]

Yea been waiting on the conversion kit list for a month now. #150

I've lost the bookmark to the list, and only added the other day.. I think I was something like #291.. It can't be worse than waiting for WL to get stuff in-stock - or ship ;-)

 

[dwcraig1]

I've lost the bookmark to the list, and only added the other day.. I think I was something like #291.. It can't be worse than waiting for WL to get stuff in-stock - or ship ;-)

Zaloguj | E-papierosy-forum.pl
Now if this will only work
It seems to work OK

 

[dwcraig1]

I have all parts except the ceramic housing assembly to make a Ithaka/Terminator.
I have the base and the basic feeder piece on pre-order and my 30 mm tank is on the way, it's mouthpiece is almost identical to Ithaka.
I had ordered the Ithaka base parts to use to make a Terminator GGTS based but the Oddy ones became available so I got two of those.
I can use the Term top tank and cap or buy the ones for Ithaka.
The Ithaka ceramic housing assembly is around $50 and $23 for the tank top parts, HMMMM

 

[dwcraig1]

My friend was telling me that he built and installed a new coil in his Terminator yesterday, he said it tasted good but the atomizer got real hot. I showed him how to meter it correctly and low and behold he had made his coil with three pieces of NR, WOW, can you imagine the wattage @ 10 amps, no less than 30 watts.
Calculated with voltage drop to 3 volts but probably not that low (Panny batt)

 

[inuj26]

For those using the tobeco clone.

I had this first before I got the Term, it works but really had to tinker a lot to make it work. This little rubber made it a lot easier.

Remember that little rubber condom thingie used to cover your cartomizers? It's not circular with little edges to it. Cut 4-5 millimeters of it. You can use this as the oring in the top cap, it goes right into it and hugs the mouthpiece just right. Push it right down using the collar then tighten it down. This will prevent the leaks and no need to put orings inside. Been using this for months, till my positive post broke and was cut in half.


Also, for the term I used the white rubber cap in cartomizers, I just shave off 2-3 millimeters from it (using a razor blade) and use it as the oring in the bottom - positive pin part. This seals well and makes sure that the positive pin is just 1 millimeter (or even less) out post.

Hope this helps.

 

[UA72Riddle]

Just got my tracking info today.

Got my tracking too!! Wonder how long it will take? I'm guessing 2-3 weeks...of course thinking worse case scenario...hopefully.

 

[Hostile]

I have all parts except the ceramic housing assembly to make a Ithaka/Terminator.
I have the base and the basic feeder piece on pre-order and my 30ml tank is on the way, it's mouthpiece is almost identical to Ithaka.
I had ordered the Ithaka base parts to use to make a Terminator GGTS based but the Oddy ones became available so I got two of those.
I can use the Term top tank and cap or buy the ones for Ithaka.
The Ithaka ceramic housing assembly is around $50 and $23 for the tank top parts, HMMMM

a 30ml tank? good god, that's HUGE. if that's not a typo, where?

 

[Hostile]

Got my tracking too!! Wonder how long it will take? I'm guessing 2-3 weeks...of course thinking worse case scenario...hopefully.

I just found out mine shipped on friday! tracking says it's left warsaw (export) so maybe I'll have it soon.. time to start stalking the mailman again.. got 4 terminators coming in, and another 10 meters of ekowool and now my conversion! great day! now the mailman will be terrified of me again.

 

[dwcraig1]

a 30ml tank? good god, that's HUGE. if that's not a typo, where?

OOps, I'll have to go back and edit that to say 30 mm

I tried erlier about 4 times to order the parts for Ithaka from E Smoker Guru but I wasn't getting my verification code from Money Bookers, I'll just wait for COV, it should only be a couple mere days if that.

 

[Hostile]

OOps, I'll have to go back and edit that to say 30 mm

I tried erlier about 4 times to order the parts for Ithaka from E Smoker Guru but I wasn't getting my verification code from Money Bookers, I'll just wait for COV, it should only be a couple mere days if that.

ok.. I was wondering if my mind was melting sideways.

 

[UA72Riddle]

I just found out mine shipped on friday! tracking says it's left warsaw (export) so maybe I'll have it soon.. time to start stalking the mailman again.. got 4 terminators coming in, and another 10 meters of ekowool and now my conversion! great day! now the mailman will be terrified of me again.

What site did you use to check? USPS isn't showing anything for me yet.

 

[tagster]

What site did you use to check? USPS isn't showing anything for me yet.

http://www.track-trace.com/post

 

[Hostile]

What site did you use to check? USPS isn't showing anything for me yet.

I used ?ledzenie przesy?ek - Tracking | sledzenie.poczta-polska.pl with google translate

 

[UA72Riddle]

Mine says "sending a consignment of Polish".....whatever that means....