Titanium wire, vaping and safety
- Thread starter TheotherSteveS
- Start date
- th_trl_thread_readers 0
- Status
Anybody have a nice compilation of these DNA200-ready graphics they'd like to share?
Take a look here:
DNA 200 THEMES
499 of them right now to choose from and you can edit them fairly easy since they are B&W.
Freely shared on Evolv forum:
Show off your custom screens. - DNA 200 Early Adopters Forum
And lots here:
DNA200 CUSTOM SCREENS:
DNA 200 THEMES
Have you tried the "Mikla" app?
Custom Theme Image Gen Application - DNA 200 Early Adopters Forum
I struggled making my own themes as well until I started using this. I like it.
A VT200 could be on the cards now
But they go for around $180usd here
Need to keep my eyes open for a sales bargain stateside
A VT200 could be on the cards now
But they go for around $180usd here
Need to keep my eyes open for a sales bargain stateside
ecig.com did have them for $120 USD (before coupons, which are almost always active). I got mine for $118 USD shipped. Of course, I have no idea what they'd charge you to get it to England.
Thanks
That would have been a good price
Got as far as shipping address and found they ship to many countries but not the UK
FYI,
My "ti burn-500c-max" profile is set at 0.006332 TCR (at 300C setting Ti Gr1 reaches 500C - but that is on average across the whole coil, so middle of coil will be hotter in real-world applications). My preset is at 240C on this profile (I didn't write down what the real temperature for that is and don't have escribe on this laptop, but I remember I tried to set it at temperature just below where rutile sublayers start to form). I generally do 3x 20sec burns at this setting (no pulsing) which should be suffice(as long as your atty/mod/screws are not messed up), and not cause any rutile formation.
EDIT: 3x20sec is what I do to new TI wire to oxidize it, for cleaning, 1x20 sec should suffice.
My "ti burn-500c-max" profile is set at 0.006332 TCR (at 300C setting Ti Gr1 reaches 500C - but that is on average across the whole coil, so middle of coil will be hotter in real-world applications). My preset is at 240C on this profile (I didn't write down what the real temperature for that is and don't have escribe on this laptop, but I remember I tried to set it at temperature just below where rutile sublayers start to form). I generally do 3x 20sec burns at this setting (no pulsing) which should be suffice(as long as your atty/mod/screws are not messed up), and not cause any rutile formation.
EDIT: 3x20sec is what I do to new TI wire to oxidize it, for cleaning, 1x20 sec should suffice.
Last edited:
Here's a graphic I made for a titanium dry burning profile. Made it black on a white background so it stands out more and so that you don't use it accidentally.
Setup a profile. I set mine to fire at 450F/232C. Go to the "special" tab and set the TCR to .00732. Set the power to whatever, but I set mine to 15w.
This should fire your coil somewhere around 900F/482C.
Setup a profile. I set mine to fire at 450F/232C. Go to the "special" tab and set the TCR to .00732. Set the power to whatever, but I set mine to 15w.
This should fire your coil somewhere around 900F/482C.
Here's a graphic I made for a titanium dry burning profile. Made it black on a white background so it stands out more and so that you don't use it accidentally.
Setup a profile. I set mine to fire at 450F/232C. Go to the "special" tab and set the TCR to .00732. Set the power to whatever, but I set mine to 15w.
This should fire your coil somewhere around 900F/482C.
I have one of these set up on my DNA200. Whenever I fire using it on my Ti/KA1 fused Clapton builds it doesn't read a "temp-sensing" wire and the temperature line blanks out to those two dashes. I don't know why. I use my builds on the Steam Engine Ti profile and my own custom made ones using the Wire Wizard with no problems. But, yeah, when I try to dry-burn using my Ti Dry-Burn profile and that TCR, it doesn't sense the Ti.
Happy New Year to all the Ti vapers!!
Here's a graphic I made for a titanium dry burning profile. Made it black on a white background so it stands out more and so that you don't use it accidentally.
Setup a profile. I set mine to fire at 450F/232C. Go to the "special" tab and set the TCR to .00732. Set the power to whatever, but I set mine to 15w.
This should fire your coil somewhere around 900F/482C.
Oh, don't tell JMarkus, this might be the ONE!
Nice......
And let's not forget when giving out device settings for a DNA200 DRYBURN preset, to ADD: Turn OFF, ALL preheat settings!
Late but no less sincere,,,,
Happy New Year to all You fellow Ti-ers as well
Happy New Year to all You fellow Ti-ers as well
- Status
Similar threads
- Locked
