Tootle Puffers, Redux (The Sequel)

[Krisma]

So we diverge in Aspire vs Kanger but are united in Sophia

No, no Cerotank - I am happy with my Gladiusses (with Kanger in them) - and want to be frugal like Robert (with the exception of the Lady We Are Waiting For)

I am split three ways, Sophia's, cartomizers and then coils (mainly in my billet boxes and one tank)

 

[DingerCPA]

@Krisma - I'm technically "Womping" with my Cloupor at the moment, but I'm running in TC mode with Ni200 (single coil in my Velocity) I just saw a blurb that it might be wonky in Titanium mode? I don't have any Ti wire to try, and I'm not in any hurry to get any.

BUT, for me, it has been doing quite nicely - I got the "Dry Coil" message last evening when I drained out my Velocity.

My "Happy, Happy, Joy, Joy" was running my forlorn KFL with a Ni200 coil. I've run through almost two tanks on the KFL and NO DRY HITS!!!! That was my bane with Kanthal, but it's making me enjoy a little-used tank once again.....

In VV/VW mode - super-dee-duper awesome. @Katdarling, I'll be quite interested in your evaluation - what your favorite toppers would be with this little beastie. Krisma - how go the carto tanks? I'd so wanted to like a carto tank, but the draw is so tight for me. My PT2s all have airflow bases, and they're always wide open.....

I'm enjoying this bad-boy so much, I might have to get another one (in a different/decorative color, of course!)

 

[MikeyConti]

Just found this on Ebay, http://www.ebay.com/itm/ANYVAPE-Dav...a20c88d&pid=100005&rk=1&rkt=6&sd=221694856725

Don't remember seeing it on Anyvapes website. If I had my iTaste VTR in rotation this would be perfect though, used to use a Smok Trophy V2 tank (Which I never cared for the looks/curves on any tube mod) with a Kanger V1 AFC Base.. In the VTR it was almost a perfect match with the curves! Only problem is the old V1 AFC Base would seal very tightly and actually broke one tank trying to undo it with some pliers lol

But why would they use the older AFC on this one??

 

[Krisma]

@Krisma - I'm technically "Womping" with my Cloupor at the moment, but I'm running in TC mode with Ni200 (single coil in my Velocity) I just saw a blurb that it might be wonky in Titanium mode? I don't have any Ti wire to try, and I'm not in any hurry to get any.

BUT, for me, it has been doing quite nicely - I got the "Dry Coil" message last evening when I drained out my Velocity.

My "Happy, Happy, Joy, Joy" was running my forlorn KFL with a Ni200 coil. I've run through almost two tanks on the KFL and NO DRY HITS!!!! That was my bane with Kanthal, but it's making me enjoy a little-used tank once again.....

In VV/VW mode - super-dee-duper awesome. @Katdarling, I'll be quite interested in your evaluation - what your favorite toppers would be with this little beastie. Krisma - how go the carto tanks? I'd so wanted to like a carto tank, but the draw is so tight for me. My PT2s all have airflow bases, and they're always wide open.....

I'm enjoying this bad-boy so much, I might have to get another one (in a different/decorative color, of course!)

I will keep the elegance tanks for it. Just feels a nice balance and I can change the look with crystals. If I don't get to keep the second one I will end up buying another white. Very smooth fire.

Unless the tank has major air channels I put Smok airflow controllers under all my carto tanks and they are working beautifully. If you want air you should try those Smok revives I reviewed earlier. Huge air, dual coil ,great flavour. Too much air for me but hubby is loving them. I will get more when MV has another sale.

 

[Krisma]

Just found this on Ebay, http://www.ebay.com/itm/ANYVAPE-Davide-BDC-ADJUSTABLE-AIRFLOW-MEGA-NEW-STYLE-AEROMAXX-TANK-ANYVAPE/161270136620?_trksid=p2047675.c100005.m1851&_trkparms=aid=222007&algo=SIC.MBE&ao=1&asc=34226&meid=069e9482069a42f0a610af6c6a20c88d&pid=100005&rk=1&rkt=6&sd=221694856725

Don't remember seeing it on Anyvapes website. If I had my iTaste VTR in rotation this would be perfect though, used to use a Smok Trophy V2 tank (Which I never cared for the looks/curves on any tube mod) with a Kanger V1 AFC Base.. In the VTR it was almost a perfect match with the curves! Only problem is the old V1 AFC Base would seal very tightly and actually broke one tank trying to undo it with some pliers lol

But why would they use the older AFC on this one??

The newer protank ones work on these tanks.

Discountvapers has them cheaper

http://www.discountvapers.com/anyvape-davide-bdc-glassomizer-aspire-version/

 

[Katdarling]

KatKatchingUp, again. Le sigh. No time lately, lovies!

As well as you too!!!
I bought the box from Heartland Creations , http://www.heartwood.com/ and used a China DNA30 board. I had tried to build 2 but I broke the first one drilling holes as the wood box is sturdy but fragile at the same time. I actually built if for my son but unfortunately he's gone back to the dark side.
Where did you get yours? It looks exactly like mine only smaller

I have a feeling ours both came from Heartland Creations (if I'm remembering correctly). Mine is a Mamu Creation, a DNA 20w. I'm so impressed with yours, you have no idea. To get a MAMU back in the day, was...... as close to impossible as could be. How wonderful yours is!!!!!

Is very nice
View attachment 500572

Congrats, Boden!!!!! Are you the first Radi guy in here? I think you are! And is it love love love love love?

Here he is in all his glory with the Variant. The video is a very entertaining watch and really warms up at the 2:00 mark...

I love him........ "crazily". 6:00 ish.

.... I gave in and have just ordered a Kabuki (gulp)

I'd love your take on it, Maytwin. I was an early adopterette of the Kabuki...

Funny thing that this Cerotank is not really known in Europa - or let's say in the German speaking world. I just saw that it is "anyvape anycoil" (at least the mini one) and also takes takes Kanger coils - and if it takes BDC than BCC fit too. Is it the same compatibility for the bigger one?

And what's funny to me is that when I was desperately searching for more Cerotanks, the only place I could find them was in Europe. Hmmm...

Mine takes Kanger AND/OR Aspire coils, just by the way. I have the V2s, but I'm pretty sure that info as to coils is on the Anyvape.com site, no?

For me it's about finding tanks that use aspire coils. The Cerotank is a good looker (all about the styling)
Kat and DP would be able to answer

What question are we answering, sweets? Sorry, long day.

So we diverge in Aspire vs Kanger but are united in Sophia

No, no Cerotank - I am happy with my Gladiusses (with Kanger in them) - and want to be frugal like Robert (with the exception of the Lady We Are Waiting For)

@Katdarling, I'll be quite interested in your evaluation - what your favorite toppers would be with this little beastie. Krisma - how go the carto tanks? I'd so wanted to like a carto tank, but the draw is so tight for me. My PT2s all have airflow bases, and they're always wide open.....

I'm enjoying this bad-boy so much, I might have to get another one (in a different/decorative color, of course!)

Dinger? Which beastie, please? Oh gawd I'm tired!

 

[Krisma]

Kat dinger was asking about the cloupor mini+ but yours is in the void I think

The opinion asked for was about the worthiness of the cero tank. I was interested in it because of aspire coils no it looked elegant.

 

[AndriaD]

The newer protank ones work on these tanks.

Discountvapers has them cheaper

http://www.discountvapers.com/anyvape-davide-bdc-glassomizer-aspire-version/

DV is very hard to beat for replacement coils. It probably doesn't apply to Australia, but I always found their shipping amazingly fast too.

Andria

 

[Krisma]

DV is very hard to beat for replacement coils. It probably doesn't apply to Australia, but I always found their shipping amazingly fast too.

Andria

I bought some Davide tanks from them and shipping is reasonable. They charge by weight rather than the size of the box. Took about 3 weeks which is normal. It's actually cheaper for us to buy coils locally at the moment but only because it seems as though every man and his dog is opening a vape shop. Lots of specials and clearances. And we get a lot of deals direct from Hk and China.

 

[Katdarling]

Kat dinger was asking about the cloupor mini+ but yours is in the void I think

The opinion asked for was about the worthiness of the cero tank. I was interested in it because of aspire coils no it looked elegant.

Thankya lovie.

Yes, my prize Cloupor is still somewhere..... but not here yet.

I really must say, that with all the tanks I use, I've come to abstolutely love the Cerotank. It is by FAR the easiest to use (think Bella/Elegance, Krisma), and it looks great and performs perfectly, every single fill.

It doesn't hurt that Phiniac does such beautiful etching work for the replacement tanks, too.

 

[Krisma]

They are a stylish tank, if it's meant to be I will find some. Resigned

If not I will just have to play with the new red provari mini

 

[nebulis]

I really must say, that with all the tanks I use, I've come to abstolutely love the Cerotank. It is by FAR the easiest to use (think Bella/Elegance, Krisma), and it looks great and performs perfectly, every single fill.


View attachment 500718

Really nice, especially with Phiniac color matching. So if this is V2 then it is 18 mm, a nice size for boxes (or for PV 2.5).

 

[Susaz]

Who's still using the Davides? And I thought I was old because I still rock my Vapeonly BCCs! The one in the picture is gone, broken some months ago. Another 3 ml and the mini are still around since I don't use tank breaking juices. And the heads are dirt cheap.

As for the Davides, I bought the Aspire BCC version, and really, never worked for me. I used it with some Protank coils but they never did the trick so I discarded them.

Nowadays it's a mix between the Aromamizer Velocity edition built at roughly 1 ohm, the Subox mini and nano with 1.2 ohm coils, and the GS Airs with the new 1.2 ohm heads.

 

[Susaz]

I read something not too long ago about that; each brain has an optimum processing speed for different tasks, and learning is one of the slowest, apparently, though I never found it so -- it always infuriated me how teachers would POUND.THE.SAME.INFO.OVER.AND.OVER till I just wanted to scream OK I GOT IT ALREADY, LET'S MOVE ON ALREADY!!!!!!!!!!

But this does explain to me why my very fast reading seems much slower when I'm reading a non-fiction book, or novels with particularly dense structure, like some 19th cent novels for example -- whereas "regular" fiction, I can read at near-light-speed. I read one recently called "Death and Mr Pickwick" about Dickens creative theft of the Pickwick Papers from the artist who originally conceived the idea, Robert Seymour, and good god, that thing might as well have been written by Dickens himself! It took longer than War & Peace, though it was half as long!

Andria

I'm one of those individuals for whom just listening and taking a readable note is more than enough. I taught myself to program at age 12, and flew through an engeneering degree. Yes, slower learners make me skip class too often and that was mortal, so my algebra teacher allowed me to read while she was explaining something that (obviously) I had already picked up and mastered.
As for fast readers, I love ereaders. If you can, get a ePub one, and you won't regret it! But I think it depends more about receptivity, I sometimes fly over a particularly well written book or something that interests me. While I'm crawling at Brian Cox's Quantum Theories because I still don't get them... Frame of mind, again.

 

[Boden]

Congrats, Boden!!!!! Are you the first Radi guy in here? I think you are! And is it love love love love love?

The Radius definately has the "It" factor. The shape combined with the weight and texture give it a feel of quality. The fire button... Is perfect.

It's hard to describe but I'd buy another one today without hesitation.

 

[Rixsta]

I am split three ways

Same here after an afternoon of horse riding, it's really not good for the man junk..

 

[Boden]

Same here after an afternoon of horse riding, it's really not good for the man junk..

Riding side saddle again...



Sorry, reminded me of an old friend who tried a ladies sidesaddle on a bet.. It didn't end well

 

[LJFinFLA]

KatKatchingUp, again. Le sigh. No time lately, lovies!




I have a feeling ours both came from Heartland Creations (if I'm remembering correctly). Mine is a Mamu Creation, a DNA 20w. I'm so impressed with yours, you have no idea. To get a MAMU back in the day, was...... as close to impossible as could be. How wonderful yours is!!!!!.

Thank You.
Wow MAMU! I have seen a lot of her work, but have never seen yours before, and It looks great as well!!
I did mine after I had built a clear plastic Hammond Box. I wanted something made of wood.
I tried to build my own wood box but could not get it right due to lack of proper tools. I searched like crazy on the web for wood boxes and came across Heartland

 

[fourthrok]

Funny thing that this Cerotank is not really known in Europa - or let's say in the German speaking world. I just saw that it is "anyvape anycoil" (at least the mini one) and also takes takes Kanger coils - and if it takes BDC than BCC fit too. Is it the same compatibility for the bigger one?

I have the middle size one...holds about 2.8ml. liquid. It uses the Aspire (non Nautilus) coils...BDC and BVC. Plus the Kanger BDC coils. I just checked online and the Mega does, too. I'd love to get a Mega because the mid size Cero is so good. Alas, I can't seem to find them here stateside. I'm thinking of getting the Anyvape Davide now. Any feedback on that? I want to use mostly Aspire BVCs and maybe BDCs (non Nautilus) in it.

 

[Rixsta]

Riding side saddle again...



Sorry, reminded me of an old friend who tried a ladies sidesaddle on a bet.. It didn't end well

No but I had the neighbor on the back which pushed me forward. Never again lol