Tootle Puffers, Redux (The Sequel)

[fourthrok]

Maybe this helps...

Yes...that helps a lot! Although that Todd is a bit exasperating to listen to and watch, with all his pauses and "meaningful looks" and heavy accent! The problem I was having was that I couldn't get the top and bottom of the tank to unscrew from the pyrex tube (and was worried I might break something). After I saw ol' Todd do it, I got my courage together and, with wrapped pliers, was able to get the top piece off. After that it was easy to get the bottom off. At that point I could see where those silicon spare gaskets were supposed to go...should they be needed in future!

Thanks!

 

[Vapez]

I have about 200mls of 15mg left, so I can easily go back. I'd be happy to go lower. But it's true, I do have a lot of stress in my life, but this is still a goal for me.

I could chain vape all day. But the "problem" is that I can't really vape all the time as I got a little girl. I keep it in another room or just go outside. And that'll be an issue if I keep having to chain vape all the time.

And @AndriaD, I could mix up my 15mg and 12mg bottle a little. I will always keep something on the higher levels, just in case I really need it.

 

[Vapez]

On the positive side, I've only drinked a litre since I posted about I should lower water intake. And now I don't have that much of a headache. I don't know for sure, but possibly. Though it won't help for my "chronical constant" headache issues, as I've had it since long before I drank even close to that much water.

 

[Oregon Linda]

And you can always make your own kick module from nemesis bits.

Linkie-linkie?

3D 510 adapter to Kick module breakdown. (pics): FastTech Forums

But if you already have a nemmy, not relevant.

Are you saying that a Nemesis comes with a kick module?

 

[3mg Meniere]

Are you saying that a Nemesis comes with a kick module?

No. Most nemeses can be kicked in 18650 mode.

 

[duby1622]

Going to pull the trigger on one of those New Yorkers as well. Any Have any experience wicking with ekowool? $.25 for 3 feet of it, thinking about throwing some in the cart as well.

 

[Oregon Linda]

No. Most nemeses can be kicked in 18650 mode.

Ah. Very nice. I was looking at some Nemesis mods. Maybe I'll get one of those, too. (I should never look at vape gear - it just never ends! )

 

[Krisma]

Are you saying that a Nemesis comes with a kick module?

They come with a kick tube and you can use that plus two other bits to make a module with a 510 connection that screws on any mod.

In this pic these are the bits and then below them is what it looks like put together. I used the VV kicks I didn't like in this module.

It adds length but it gives you options to use a kick on anything. I made these for a side by side mod that I wanted regulated without the chip.

 

[LJFinFLA]

Yes...that helps a lot! Although that Todd is a bit exasperating to listen to and watch, with all his pauses and "meaningful looks" and heavy accent! The problem I was having was that I couldn't get the top and bottom of the tank to unscrew from the pyrex tube (and was worried I might break something). After I saw ol' Todd do it, I got my courage together and, with wrapped pliers, was able to get the top piece off. After that it was easy to get the bottom off. At that point I could see where those silicon spare gaskets were supposed to go...should they be needed in future!

Thanks!

Your Welcome!
That's from a while ago. I like his videos. He's like the normal bloke, no screaming or cursing. You should check out some of his new video's. He's gotten better!

 

[3mg Meniere]

They come with a kick tube and you can use that plus two other bits to make a module with a 510 connection that screws on any mod.

In this pic these are the bits and then below them is what it looks like put together.

And with the kick ring you can use it with a VW kick.

 

[Krisma]

And with the kick ring you can use it with a VW kick.

With the nemesis you can use the kick ring on that mod but the threading is different to the ones Linda bought. This was just a way of not needing to care about how different mods have different threading or using a mod that did not have a kick ring.

 

[3mg Meniere]

With the nemesis you can use the kick ring on that mod but the threading is different to the ones Linda bought. This was just a way of not needing to care about how different mods have different threading or using a mod that did not have a kick ring.

You are right. The cheapest Nemeses at FT have different threading than all the rest. And I would not want to take chances on trying Nemesis parts on other mods.

 

[MikeyConti]

The Ameraclone Fuhattans are also great 18650 mech mods.. New Yorker/Manhattan clone. I need to grab some more, they are pretty solid! Make sure the body is made of Copper though! I didn't like the feel of the Colored ones made of Aluminum..

 

[Shameless]

When I started using CartoTanks I ran across Baditude's recommendation to use Single Coil cartomizer's.

So that's all I've ever used (XL...for more capacity)...

(5) Baditude's Cartomizer Tank Setup Guide | E-Cigarette Forum

Thanks that info will help when my cartomizer gets here!

 

[DingerCPA]

I need to try a good RY4 again, last ones I tried were an in-house B&M mix..

I ventured over to the TFA thread earlier today. Remembered a mix called Peanut Brittle. DCraig-somethingorother is the poster's name.

Peanut Butter - 7.5%
RY4 Double - 7.5%
Sweetener/Cotton Candy - about 4%
Acetyl Pyrazine - 1%. I used 2 drops/10mL
I think I might like this a little sweeter, but I'm running a tank right after mixing. I'd like to let it sit for a couple days to see how it comes along.

Another one, courtesy of MsLoud (she calls it Blueberry RY4 - I renamed it BlueberRY4)
Bavarian Cream - 2%
Blueberry - 2%
Caramel - 4%
RY4 Double - 8%
Toasted Almond - 2%
Vanilla Swirl - 3%

And then I found a Tribeca Tribute on one of the recipe sites. I kinda like this one too (although I've only tasted Halo's Tribeca once or twice....)
Acetyl Pyrazine - 1.3%
Brown Sugar - 4%
Caramel Candy - 1.7%
Cotton Candy - 0.5%
RY4 Double - 4%
Toasted Almond - 4%

What I really like about these is that they don't taste "tobacco-ey" to me. I like the caramel/vanilla aspect of the RY4. I also have RY4 Asian, and I've not used it in any of my recipes yet, so I don't know what that's going to be like.

Good luck

 

[Eric Auer]

@Oregon Linda

Tootling a Genesis topper on a Mech is just effin great.

If you don't have one I recommend a Kraken clone, easy to build on and just great.

I think I vent a little overboard, this thing builds muscles....

Perseus 30mm on a 26650 Chi You. (Gesundheit!)

 

[LJFinFLA]

I ventured over to the TFA thread earlier today. Remembered a mix called Peanut Brittle. DCraig-somethingorother is the poster's name.

Peanut Butter - 7.5%
RY4 Double - 7.5%
Sweetener/Cotton Candy - about 4%
Acetyl Pyrazine - 1%. I used 2 drops/10mL
I think I might like this a little sweeter, but I'm running a tank right after mixing. I'd like to let it sit for a couple days to see how it comes along.

Another one, courtesy of MsLoud (she calls it Blueberry RY4 - I renamed it BlueberRY4)
Bavarian Cream - 2%
Blueberry - 2%
Caramel - 4%
RY4 Double - 8%
Toasted Almond - 2%
Vanilla Swirl - 3%

And then I found a Tribeca Tribute on one of the recipe sites. I kinda like this one too (although I've only tasted Halo's Tribeca once or twice....)
Acetyl Pyrazine - 1.3%
Brown Sugar - 4%
Caramel Candy - 1.7%
Cotton Candy - 0.5%
RY4 Double - 4%
Toasted Almond - 4%

What I really like about these is that they don't taste "tobacco-ey" to me. I like the caramel/vanilla aspect of the RY4. I also have RY4 Asian, and I've not used it in any of my recipes yet, so I don't know what that's going to be like.

Good luck

Thanks Dinger I think I have most of those flavors. If not I can improvise and maybe come up with something good!

 

[DingerCPA]

I have the black one. I really like yours, so I'll definitely put it on my wish list. I just bought 3 mechs for my vapocalypse box and then realized I need to also buy some kicks and 18500s.

Linda, check here: The Kick. They might have this elsewhere for a little less.

I picked up some 18500s from Sweet-Vapes. Got the AW ones. Don't remember price tho.

 

[DingerCPA]

I just picked up some INW Vanilla Pipe. I'll have to do some playing - I would like a cherry (maybe with almond) pipe tobacco (reminds me of my Dad ) Picked up INW Cherry, too. Not sure I like how it smells just yet - a lot like cherry pie, and that's not my preference.... I'm more of a maraschino cherry person.....

 

[TrollDragon]

If you don't have one I recommend a Kraken clone, easy to build on and just great.

I fully Agree!

Sorry for the phone pics...

Stainless Steel Cable wrapped with Mesh and coiled.