yeah but waking up laying on an Ego and tank are not fun.
Tootle Puffers, Redux (The Sequel)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
- Status
I saw what you did there
Sheila is a term of affection......there isn't one for the guys.
Imagine that.
Anyone here use Iclear30 dual coil clearos? This place has coils for them for .99 for 3 pack.
I have bought from them twice and got good very fast service and 1.99 shipping.
They also have the Sigelli Zmax for 9.99. I am going to get some of their 18500 1000 mah batteries for 3.99.
https://www.ecigcharleston.com/Ecigcharleston-Closeout-s/257.htm
I have bought from them twice and got good very fast service and 1.99 shipping.
They also have the Sigelli Zmax for 9.99. I am going to get some of their 18500 1000 mah batteries for 3.99.
https://www.ecigcharleston.com/Ecigcharleston-Closeout-s/257.htm
Hey Tootlers, Am I the only one that thinks the Innokin 30B is a great Tootle Puffing tank?
Eric
Eric
Hey Tootlers - I don't know if any of you are Discount Vapers clients, but they're doing something that they've ever done before. At least not in my four years of buying from them.
They issued a discount code - just for this weekend. "WE15" gets 15% off everything in the store.
I'm obviously a fan of theirs, but I know that I'm far from the only one who is. So yes, I'm plugging them here. Happy shopping!
They issued a discount code - just for this weekend. "WE15" gets 15% off everything in the store.
I'm obviously a fan of theirs, but I know that I'm far from the only one who is. So yes, I'm plugging them here. Happy shopping!
While I have recently regularly used a Nautilus tank outfitted with a Vaporshark TC (Ni200) atomizer I tend to steer away from using my Nautilus tanks in this way as the atomizers are just too darned expensive compared to most of my other tanks which are rebuildable.
Today after successfully rebuilding two Atlantis coils (one dressed in Ni the other 28awg Ti) I thought I'd turn my sights on the Nautilus coils - after all I had RBA's for the tanks that used Atlantis coils anyway. I tore one of my clogged/burnt coils apart to see how it went together and then carefully disassembled another cast off. I could see why the VS coils were fairly expensive as stuffing enough Ni200 in there while keeping a nice spaced coil indeed was problematic. I thought - maybe 28awg Ti would work.
I wrapped on a stainless machine screw and hit the coil with a torch so it would keep its shape then carefully wrapped a thin layer of cotton around the coil - to much!! (dang) after some adjustments I was able to get the coil into the center part and then wrap a thin layer of cotton around it and press it into the outside casing. After pressing the assembly back together I stuffed a bit more cotton in from the top just for good measure and added the Aspire screen and primed the coil.
I keep an SMY TC50 on my work bench just for testing coils. I dono why as about 1/2 the time it won't register the tank bottom OR the atomizer installed - I grabbed a trusty SXminiM and mounted the Nautilus bottom+newly rebuilt with Ti atomizer - 0.67 ohms - this will work!
I may of gotten an even higher value (I've recently got 1.0ohm readings on a few recent Ti builds) if I had made the coil longer or used 30 or 32awg Ti but I don't like working with those sizes much.
So my project for the afternoon is finished - reworked one of my classic 'toodle puffing' tanks to a moden TC mode that I can use on two of my mods. I'll even be happier to see that I no longer have 'dry hits' on the Nautilus tanks with Ti like I did with the stock Aspire Kanthal coils.
Today after successfully rebuilding two Atlantis coils (one dressed in Ni the other 28awg Ti) I thought I'd turn my sights on the Nautilus coils - after all I had RBA's for the tanks that used Atlantis coils anyway. I tore one of my clogged/burnt coils apart to see how it went together and then carefully disassembled another cast off. I could see why the VS coils were fairly expensive as stuffing enough Ni200 in there while keeping a nice spaced coil indeed was problematic. I thought - maybe 28awg Ti would work.
I wrapped on a stainless machine screw and hit the coil with a torch so it would keep its shape then carefully wrapped a thin layer of cotton around the coil - to much!! (dang) after some adjustments I was able to get the coil into the center part and then wrap a thin layer of cotton around it and press it into the outside casing. After pressing the assembly back together I stuffed a bit more cotton in from the top just for good measure and added the Aspire screen and primed the coil.
I keep an SMY TC50 on my work bench just for testing coils. I dono why as about 1/2 the time it won't register the tank bottom OR the atomizer installed - I grabbed a trusty SXminiM and mounted the Nautilus bottom+newly rebuilt with Ti atomizer - 0.67 ohms - this will work!
I may of gotten an even higher value (I've recently got 1.0ohm readings on a few recent Ti builds) if I had made the coil longer or used 30 or 32awg Ti but I don't like working with those sizes much.
So my project for the afternoon is finished - reworked one of my classic 'toodle puffing' tanks to a moden TC mode that I can use on two of my mods. I'll even be happier to see that I no longer have 'dry hits' on the Nautilus tanks with Ti like I did with the stock Aspire Kanthal coils.
I did not know that. It floored me when I saw it. Thanks for the education though, and I stand corrected.
And I'm still deciding what to get.
New to me tootle puffing tanks Aero tank mega 22mm, One set up with the stock coils and one with pro tank 2 single coils, extra top stem seal. Look good on the P3 and vape great good taste. No leaks
I was going to say drongo but then Dave might get upset
Stevo, Wayno, Johno, Dano, Davo, Robo, Jacko, Gazza, Dazza, Bazza.
drongo is not a term of affectionI was going to say drongo but then Dave might get upset
Stevo, Wayno, Johno, Dano, Davo, Robo, Jacko, Gazza, Dazza, Bazza.
Written on 21st Century papyrus
Madvapes also has 15% off store wide - no coupon required.
While we are doing this. Chinese vendors have a week long holiday at the beginning of October and have mega sales straight after it. Processing might be a bit slow as they pick up the backlog and the postal system is a bit crazy but if you are not in a hurry or use DHL then there are great bargains to be had.
At YOU?I was going to say drongo but then Dave might get upset
Stevo, Wayno, Johno, Dano, Davo, Robo, Jacko, Gazza, Dazza, Bazza.
HIGHLY improbable.
In that case, it fits.drongo is not a term of affection
Written on 21st Century papyrus
And I'm not young enough to be affected by name calling. That's a new generation thing.
If I had ever come home crying about being called something, it'd have been followed by three beatings. My father, my brother, then my sister (just for good measure).
Mom would have been disappointed in me, but she wouldn't have beat on me over it.
So have some fun...
Precisely.
- Status
Similar threads
