Tootle Puffers, Redux (The Sequel)

[LJFinFLA]

I kinda thought the same...trying to up sell me. Not going to work. They haven't pyshed anything on me yet because I haven't ventured into the store. Shame really - I've gotten to know a few staff members there and quite like them. Think I'll check out our other B&M...
Thanks for your input! Much appreciated!

Well maybe if you happen to be passing by the store you could go in and see if their suggestions change. Maybe since you know some of the people there you will get a different answer. They may not have known you by your email address. Just a suggestion.

 

[juskiddin]

Justkiddin, I use my ProTank 2's and Davides on every battery holder I got: CoolFire IV's, ProVari's 2.5, VaporShark rDNA, istick 20 and 30, MVP's 2.5, 20 watts and 3.0 and the subox mini.....I do rebuild them with 30 Kanthal and cellucotton somewhere between 1.5-2.0 and use an airflow controller with them. Sometimes I use the Aspire "Replacement" BVC's (NON nautilus) with them by using an extension ring which I believe can be gotten at Vapor Beast.

Oh thank you muchly! I feel better now. I was planning on a new tank with a Coolfire IV but in the new year some time.
I do like my PT2'S and happy to hear I won't need to kick 'em to the curb

 

[juskiddin]

Well maybe if you happen to be passing by the store you could go in and see if their suggestions change. Maybe since you know some of the people there you will get a different answer. They may not have known you by your email address. Just a suggestion.

...and a good suggestion! Might try that although their website doesn't show any Innokin products
No prob, I can look elsewhere.

 

[Vapez]

Saw two vapers today. I keep finding more and more all of a sudden.

But this one stood right next to a bus stop, chucking clouds and all the vapor went into the seats where 4-5 people sat.....I got tempted to tell him not to.

And the people on the bus stop didn't say anything. They just took a sneak peek sometimes and else just sat there angry looking and refused to watch. Typical norwegians.

Vapez

 

[Robert Cromwell]

$21.59 if you use their YEAHBABY coupon.

Andria

I used a different one and they gave me $5 off and free shipping.

 

[fourthrok]

Trust me. I would go without a vape if pink and green was the only tank available.

Not me! I like green. I like pink, too! Even together it looks kinda like Spring...so it's okay by me! Besides, I have no pride when it comes to vaping. So long as my device works, and my tank/atomizer/cartomizer delivers a good taste...I'm happy with just about anything. I like good looking better...but am not going to pass up on vaping over a little detail like a "tasteless tank"...lol!!!

 

[corn flakes]

I kinda thought the same...trying to up sell me. Not going to work. They haven't pyshed anything on me yet because I haven't ventured into the store. Shame really - I've gotten to know a few staff members there and quite like them. Think I'll check out our other B&M...
Thanks for your input! Much appreciated!

That's what they do. I bought mine a couple of weeks ago in Canada. $45 ++

 

[juskiddin]

That's what they do. I bought mine a couple of weeks ago in Canada. $45 ++

Egads @corn flakes ! - $45 ++??? Online or B&M? Cheapest I have found so far is $60 + tax. That's what I get for living in Vancouver

 

[TrollDragon]

Egads @corn flakes ! - $45 ++??? Online or B&M? Cheapest I have found so far is $60 + tax. That's what I get for living in Vancouver

Cheap right here...
https://www.canvape.com/ProductDetails.asp?ProductCode=CoolFire4

 

[juskiddin]

yep they are still just 23.99 at Vapor Beast.

I hope you put a good 30 amp battery in there so you do not blow yourself up at 8 watts!
I ordered a white one. Got it, 2 drip tips, 5 unicorn bottles and an cooling fin adapter thingy all for $31 including free shipping.
got the cooling fin thingy in case I have 510 thread issues in any of my mods.

What's a "cooling fin adapter thingy"? No seriously, I'm curious because I use my PT2'S on ego one batteries and although they fit, I'm concerned over time they may strip the threading.

 

[juskiddin]

Cheap right here...
https://www.canvape.com/ProductDetails.asp?ProductCode=CoolFire4

Uuuuuu, loverly!
Tanks!

 

[Robert Cromwell]

What's a "cooling fin adapter thingy"? No seriously, I'm curious because I use my PT2'S on ego one batteries and although they fit, I'm concerned over time they may strip the threading.

One of these.
Accessories | 18650 Fin Base | VaporBeast.

 

[Muru]

Wow! Almost got fired last week for stepping on my teamleader's toes (don't even know of that's the correct way to say this in English). Managed to sway him and now my contract is extended 'till May. Go figure!

 

[juskiddin]

One of these.
Accessories | 18650 Fin Base | VaporBeast.

Righto, thank you.

 

[DingerCPA]

Morning All,

I recently emailed my local B&M to ask if they carried the Coolfire IV and if so would it fit my PT2'S. The manager responded telling me they don't carry Innokin products (??????) and they could set me up with a similar device (no thank-you). The curious thing was she told me my PT2'S would not perform well on the Coolfire IV but didn't say why.

I like my PT2'S; they've performed well for me. I like the draw (2.2 & 2.5ohm coils).

Thoughts?

Cheers

At what power level/voltage are you currently firing your PT2s? I'm guessing relatively lower power (7-9W?) Innokin claims that the CFIV will run as low as 3.0V or 6W.

@AndriaD, can you confirm that it will buck, even with a fully-charged battery?

Cheers!

 

[DingerCPA]

@juskiddin - bleh - Guess I should read ALL the way through responses before I open my trap!

I love my PT2s, and I run them on all my gear - high-powered or not. I do build 1.5-1.7ohm coils for them and use an airflow adapter.... But, they've been awesome tanks

 

[AndriaD]

At what power level/voltage are you currently firing your PT2s? I'm guessing relatively lower power (7-9W?) Innokin claims that the CFIV will run as low as 3.0V or 6W.

@AndriaD, can you confirm that it will buck, even with a fully-charged battery?

Cheers!

Yeah they do seem to work just fine at 6w; I just lowered mine from 8.5 to 6w, and it still vaped, though 6w compared to 8.5w seemed kinda weak -- in a different atty, a PT2, it's probably just fine.

ETA: between 6w and 11w, it actually vapes just like the vv3's -- it can just go a lot further on the high end.

Andria

 

[DingerCPA]

O.k. I've just experienced an "unholy alliance"..... I am now sporting the Aspire BVC (non-Nauti) coils in my Kanger STM. It's actually kinda nice! Now I know I have another alternative (albeit "blister-packing" - nods to @Katdarling and @DPLongo22)

Pleasantly surprised

 

[David Wolf]

Wow! Almost got fired last week for stepping on my teamleader's toes (don't even know of that's the correct way to say this in English). Managed to sway him and now my contract is extended 'till May. Go figure!

Perfect English, Ja Good for you on the job!

 

[sisu]

It does, if the idjits bother to scan it.

Mine arrived at my local PO at 6:41am and got scanned in, but *JUST NOW* do I see "sorting complete," 4 hrs later... hopefully the next thing it shows will be "out for delivery."

Andria

Thank you. Mine arrived at the San Diego facility 4 hours after yours. According the tracking that is where it remains. It sure ain't here.