Build I just did. Let see how it works.
Here is 9 wraps 26/32 Clapton wire around 2.5mm drill bit
Here is 9 wraps 26/32 Clapton wire around 2.5mm drill bit
Hastur RDTA from Cthulhu Mods
- Thread starter HalfBaked
- Start date
- th_trl_thread_readers 0
- Status
Dang, 9 wraps! That'll need just a little power 
Does it only have one fill hole? Not two to let displaced air out?
Does it only have one fill hole? Not two to let displaced air out?
Dang, 9 wraps! That'll need just a little power
Does it only have one fill hole? Not two to let displaced air out?
Only one hole :/
Around 0.6ohms. Works well with Sxmini and powerful mode
Doesn't need that much power after it's warmed up.The whole point of top filling is its supposed to make filling faster. The point of a side fill is so no matter what you will not flood the deck . They have missed both points big time. What were they thinking?
That fella from that video review that EDO posted is too much! With that accent and pinned pupils, he has to be from Massachusetts.
....more like NJ. He's got that Sopranos "Fa-getaboudit!" down to a fine art.
I emailed Cthulhu about the positive post "press fit" issues, since they're about to start sending out pre-orders. This is the response which I received; hope it's true.
"Hi, our team had fixed the post problem(we change the ss pin). we will only send out order with new deck. Thank you."
Short and sweet, but they say they have it solved.
"Hi, our team had fixed the post problem(we change the ss pin). we will only send out order with new deck. Thank you."
Short and sweet, but they say they have it solved.
I never had a needle flow that quickly. They must be using 100% PG liquid.
Sent from my iPhone using Tapatalk
I was on the fence, but this loks like just another over rated pile of garbage from Cthulhu mods. I've never gotten a good bit of gear from them, won't give them the chance to rip me off ever again, sorry folks.
Take a look at that Aromamizer Supreme RDTA.
Gonna be my next tank. I love my V1 Aromamizer. haven't used any other since I got it a month or so ago.
I have not used the Cthulhu Rda as of yet, but an RDA is really hard to screw up, so I'm sure the Cthulhu models are good.
i don't know why people feel the need to bash a product and maker in a thread about them, but whatever...i use my cthulhu v2 five times as much as I use the aromamizer, it's that much better. 'a poor craftsman blames his tools'
I am with you. I love the cthulhu. Just needed to figure out how to set it up properly. Almost put it in the drawer a few times during the first week but you just need to work at it. Once it is set up, it works really well.
- Status
