I Would this setup work with the existing a2-tm setup? Long piece of wick wrapped up and coiled, with free wick going
I into the spike?
I
I--//////----
I into the spike?
I
I--//////----
Bulli A2-T
- Thread starter BigBulli
- Start date
- th_trl_thread_readers 0
- Status
@Jolly
The wick would not be pressed, since it rests in the slot. If you are concerned with vacuum happening I would just make another small hole into the smoke delivery tube (ex spike) thus letting the tank get air.
The thing with to much juice in the coil chamber is what A2 shares with Ego-C which I use atm (due to not being able to buy a A2). This happens precisely because the first wick is separated from the second and because the spike always has space.
This also answers the question of the next poster. You could drive the wick trough the spike in one piece, but it will have air and there might be excessive juice delivery.
I didn't really understand your second paragraph Jolly. Partially due to all those abbreviations, partially cause I don't have an A2 or maybe just because I am a nub
I just wan't a good vaping device and stop reading the forums all days
The wick would not be pressed, since it rests in the slot. If you are concerned with vacuum happening I would just make another small hole into the smoke delivery tube (ex spike) thus letting the tank get air.
The thing with to much juice in the coil chamber is what A2 shares with Ego-C which I use atm (due to not being able to buy a A2). This happens precisely because the first wick is separated from the second and because the spike always has space.
This also answers the question of the next poster. You could drive the wick trough the spike in one piece, but it will have air and there might be excessive juice delivery.
I didn't really understand your second paragraph Jolly. Partially due to all those abbreviations, partially cause I don't have an A2 or maybe just because I am a nub
I just wan't a good vaping device and stop reading the forums all days
Clyde, to much wick in the coil chamber will restrict air flow IMO. Air flow to the coil is fairly critical. But give it a try! I build mine exactly like Cetin shows for the A-2T. if using on my ProVari, I shoot for a 2Ω coil. Otherwise, I shoot for a 1.6-1.8Ω coil. The only difference is I torch the wick to ensure it is clean first, unless it is an emergency coil wick setup. Some liquids taste fine and others are muted... so YMMV.
There are some posts in this thread on how to do a genisis setup on the A-2T(M). It works, but is a little finicky with the metal spike and the SS wick shorting to it, but is awesome when it is working right.
ETA: Clyde, you are suggesting the wick in the coil going up in through the spike... what happens when you screw/unscrew the spike piece?
egodzilla, my second paragraph is only saying that if I get a leaking tank, I replace it, as they are very cheap. I also am saying that if it is leaking, because my coil is a low resistance, it can atomize the liquid even when flooded from the leaking, so I am not having problems.
There are some posts in this thread on how to do a genisis setup on the A-2T(M). It works, but is a little finicky with the metal spike and the SS wick shorting to it, but is awesome when it is working right.
ETA: Clyde, you are suggesting the wick in the coil going up in through the spike... what happens when you screw/unscrew the spike piece?
egodzilla, my second paragraph is only saying that if I get a leaking tank, I replace it, as they are very cheap. I also am saying that if it is leaking, because my coil is a low resistance, it can atomize the liquid even when flooded from the leaking, so I am not having problems.
Last edited:
Well the air problem which is clumsily tackled by a loose wick in the spike would be elegantly solved with a hole in the smoke tube. Of course it would need to be on the very top of it, so not much juice would enter there ...
BTW Jolly, how is A2 with gunk? Does it build up fast? How often do you change the wick?
BTW Jolly, how is A2 with gunk? Does it build up fast? How often do you change the wick?
That is all dependent on the liquid you are using! I tried some liquids that are apparently tobacco extract. It would gunk and kill the coil in a day. That liquid did the same to chinese atomizers and cartomizers. It was killing my supplies. Since, I have switched to a 80/20 and a VG liquid that doesn't do this. My current A-2TM coil is on week 2, and my current genisis coil is on about week 3 or 4.
Great ...
I just hate that this better machines are in such short supply. There is no way to buy any of them atm.
BTW, Genesis is not sold right? It is just a scheme you need to build by your self? I have no skills and means to do that
I just hate that this better machines are in such short supply. There is no way to buy any of them atm.
BTW, Genesis is not sold right? It is just a scheme you need to build by your self? I have no skills and means to do that
For the A-2, watch the http://www.bull-smoker.com for when he is releasing next batch. Or watch the classifieds. Many people get them, and can't get their coils right, or find it to fiddly, dont like the flavor with their liquid (usually a wick/coil issue btw), so they sell.
Actually you do have the means to build a genisis yourself. I have built many, and it is not that difficult. Here is an example http://www.e-cigarette-forum.com/forum/modding-forum/243494-my-cheap-version-line.html
Or you can purchase... http://www.e-cigarette-forum.com/fo...45748-house-hybrids-featuring-zenesis-pv.html http://www.e-cigarette-forum.com/forum/modder-accessories-supplier-forum/250979-genesis-line.html
I agree with JollyRogers and prefer the juice under the coil.
The Line or Cheap line are my best vaper in all terms. Flavor, TH, and no leaks.
Converting the A2 to a vertical wick improved it.
You probably get a much hotter smoke vape this way, right?
I think I prefer a cooler vape. Beside there is no way I can put one of those together. I barely own some screwdrivers and i haven't found any instructions I could really understand. ><
I think I prefer a cooler vape. Beside there is no way I can put one of those together. I barely own some screwdrivers and i haven't found any instructions I could really understand. ><
http://www.e-cigarette-forum.com/forum/modder-accessories-supplier-forum/250979-genesis-line.html
The last Line production starts shipping next week and they announced that they will have 100 extras up for sale.
The last Line production starts shipping next week and they announced that they will have 100 extras up for sale.
Watch minus's how to video. It really is that simple to get one to work with a giantamizer... http://www.e-cigarette-forum.com/fo...494-my-cheap-version-line-21.html#post5087336
SHHHH! I am trying to get on that list!!!
This production will be my third and half a dozen CheapLines. I will probably retire all my top tank models to my vaping museum with my first tire valve PT.. lol
Are you the producer of them BJ? How do I get on the list? Is it trough the vapor wall forums or is there another way?
Thanks for he help guys.
No not a producer just a convinced user.
You have to join the Croatian site, they have an English section.
Last edited:
I ordered mine on the 31st,all they had left was the aluminum.Still did'nt get a e-mail with tracking info.I quess he's busy packing up all those orders.Anyone else that purchased on the 31st get any info yet? I'm on my last atty..
I ordered mine on the 31st,all they had left was the aluminum.Still did'nt get a e-mail with tracking info.I quess he's busy packing up all those orders.Anyone else that purchased on the 31st get any info yet? I'm on my last atty..
I ordered a SS A2-TM on the 31st and received a confirmation e-mail of despatch on the 1st. Tracking picked it up on the 3rd. Perhaps it got sent to your junk mail by accident? Here's hoping you get sorted.
- Status
Similar threads
- Locked
- Locked
