iTaste MVP v2 Owners Group
- Thread starter KnurledNut
- Start date
- th_trl_thread_readers 0
- Status
Now you can have a different looking MVP anytime that you want one
Honestly, I do not care for the new Shine MVPs at all. The skulls and butterflies is just not something that I personally would want to look at all of the time. But, these skins look pretty good to me as well
Yup I'm excited I'm getting bored of my zebra print skin. Yea with the Shine MVPs they are defiantly not for a guy lol. They look cool though but even if I was a girl it's a bit to much bling.
>^.^< Sent From Meow G2
Wraps are nice but sometimes its just awesome to rock that standard look/feel
I totally agree except because of my job I got a scratch on my black cf MVP2. I work as a teamster in a refinery. So these are a protection/style mix for me.
>^.^< Sent From Meow G2
They have always been pretty quick with me and any problems I have had, they dealt with it quickly. I have a J-wrap end stand that too about 2.5 weeks. but those are made to order, so I knew before I ordered. Printer issues would be a serious problem with making wraps and we shut down the university a bit ago for weather, so I personally wouldn't be worried about it. Heck, I didn't even get packages for 2 days :/ My postman just handed out pink slips and told me they were not delivering packages when I stood watching them put pink slips in the boxes :/
I really don't think that Cap't was calling you a liar. I think he was stating there is a more probable explanation for what you experienced
Counterfeiting and cloning is rampant on relatively easy mechanical products such as Mech Mods, Atty's and tanks. But with regulated mods it becomes a bit more difficult.
Innokin DOES sell unbranded product to allow others to brand them. One such product is the eLego brand, shown here:
Elego VV v3 Express - ITCVapes
While it is not beyond the realm of possibility to "clone" a regulated mod like the VV3 or MVP, the question must be asked, can it be done "cheaper" which is the whole purpose of someone "cloning". Since the unit in question is already manufactured in China, I imagine that the only thing a "cloner" could do, is to replace the battery with a smaller capacity battery.
That is possible, but would that be sufficient to save enough money to justify counterfeiting? The wholesale cost for an MVP or VV3 is so low, that it's hard to make them cheaper.
And if any regulated mod were to be "cloned" it would most likely be the highly touted ProVari and not the modest MVP. A mod based on the ProVari chipset would sell like hot cakes...
More than likely, you either experienced an MVP that was not Innokin branded, or perhaps, a company bought factory rejects from the back dock that Innokin rejected.
These two scenarios are much more within the realm of probability than someone actually creating full blown counterfeits.
Now Innokin and Fasttech did get into a pissing contest awhile back, and got into a war of words. Innokin stopped just short of accusing Fasttech of selling fakes by mentioning that Fasttech was not on their list of known vendors/customers. Of course this could be because Fasttech used a front company to purchase them from Innokin. Innokin was not pleased that Fasttech was selling all their product at below their suggested retail which is why they came up with the whole scratch card thing.
I don't know if we'll ever know the whole story there.
So while it is feasible you did catch a clone "in the wild" it's more likely that you got an off branded unit or factory reject.
Last edited:
Dude relax all he said was no one here has seen a cloned mvp. So unless you have proof(since you made the claim the burden of proof falls on you) we have no reason to believe what was said by a random person we don't know to be true. Please just relax and take a deep breath my friend.
He was saying the mvp 2.0 is a regulated apv. And while Alot of none regulated APV's are being cloned the regulated ones not so much.
Last edited:
Here's a perfect example:
An itaste 134 "inspired" mechanical mod.
$42.70 134 Styled Mechanical Mod - aluminum + stainless steel at FastTech - Worldwide Free Shipping
It's easy to copy the look but not so easy to copy the circuitry...As a result you have a 134 looking mech mod, but not a true 134 clone.
An itaste 134 "inspired" mechanical mod.
$42.70 134 Styled Mechanical Mod - aluminum + stainless steel at FastTech - Worldwide Free Shipping
It's easy to copy the look but not so easy to copy the circuitry...As a result you have a 134 looking mech mod, but not a true 134 clone.
I have the Frost MPV and once it does get scratched, it came with a free wrap, so I can put on anytime... What I like about the energy Frost is does have a plastic coating to protect it.
I have the Frost MPV and once it does get scratched, it came with a free wrap, so I can put on anytime... What I like about the energy Frost is does have a plastic coating to protect it.
Man card at play here
1: duct tape only black or silver.
2: plasti-dip.
3: be proud of the scratches.
kidding really we need more options for covers.
you know they do make a camo duct tape now, plus just about any color you want
Now you can have a different looking MVP anytime that you want one
Honestly, I do not care for the new Shine MVPs at all.
The skulls and butterflies is just not something that I personally would want to look at all of the time.
But, these skins look pretty good to me as well
I've yet to order any,
these look like the same but cheaper...
I like the description "removable vinyl skins" ; "easy to apply and remove"
- Innokin iTaste MVP Di Cut Vinyl Skins
Last edited:
I've yet to order any,
these look like the same but cheaper...
I like the description "removable vinyl skins" ; "easy to apply and remove"
- Innokin iTaste MVP Di Cut Vinyl Skins
They do look alike. I wonder if they would not be close to the same price after you pay shipping on yours though. I really like VapingTown. I have never had packages delivered to me faster by any other vendor so far
With the exception of one that is only 3 hours away from me.
Can you post a pic of the R2D2 on your MVP? I'm kinda interested it picking that one up. Either that or trying to find a Fett one.
Thank you
Just a note for new Shine owners. There are extra crystals wrapped up in the middle of the beauty ring. I almost threw it away... Check your package carefully.
I normally wouldn't respond to some one who reacts with this kind of nasty attitude but since your new here I'll give it one try.
I never said any thing about your statements being a lie. In case you are some how handicapped with your reading comprehension I quoted myself above so you can read it again and hopefully more fully grasp the meaning. I said nothing about your statements. What I said was I don't believe what your B+M told you they saw was in fact a clone.
You are basing your opinion on what a person at a B+M, who is trying to sell "authentic" products, told you. I am basing my opinion on many moths of ownership of both the V1 and V2 as well as following this and every other thread on here about the MVP. If a clone was out there it would have shown up here, it has not. WOW, actual facts. Not hear say and he said she said. Just facts
I don't really care what you believe, it effects me not. You can believe the scratch and sniff malarkey if that makes you happy. I will however stand by my statement that at this time there are no known clones of the MVP.
Have a WOW kind of day!
Last edited:
This *exact* same thing is happening with my order from 1/22. I got the exact same stories about the printer and the weather causing a delay. The fact that the stories are identical makes me think they're true. I'm still waiting for my shipping notification. I'm trying to be patient but I WANT MY WRAP!! I might contact them again tomorrow to see what's up.
- Status
Similar threads
