iTaste MVP v2 Owners Group

[Danolink]

Yep.. it'll stay at 3.3.. The limiting factor then becomes the batteries amp limit, which I believe is 3 amps.. Which theoretically means the lowest you can go is 1.1 ohm, but there is one here who claims to be running .8

Both of mine will fire with a 0.8 ohm coil.

 

[AAlaniz7]

Capt, here's my new clone:
https://tapatalk.com/tapatalk_image.php?img=aHR0cDovL2ltZy50YXBhdGFsay5jb20vZC8xNC8wNi8yNC9vcmlnaW5hbC9lZHU0YW15My5qcGc%3D

Some kind souls helped me diagnose a wicking problem. Fixed that when I got home from work this evening, and WOOT - way tasty, yummy, good!

That's an awesome looking clone you got there! Where did you pick it up at? Performance?

 

[DingerCPA]

AAlan, got it from fasttech. It was $14.77 (don't have quick link at hand. Will try to post tonight for u)

Sent from.... ooh look! Something shiny!!!

 

[brookj1986]

Anyone that was part of the Vamo group buy from focal ecig, I paid for the tracking and mine shows that it was processed thru chicago sort facility. I'll probably be seeing it in the next 24-48 hours.

Sent from my Galaxy Note 3 via Tapatalk.

 

[Keirster]

I have to say that there is a small part of me that likes the unexpected arrival time from a China order. Some items are so inexpensive with the free shipping, I like to have 2 or 3 small orders awaiting arrival. Starting to collect Drip tips, trying some different RDA's ( Dripping is my favorite for flavor ). Still haven't gotten that 2nd mech and it has been about 7 weeks with my Turtleship clone, so I have resisted collecting the pricier stuff. I do want a copper mech and dripper though, they are so purdy.

My MVP is never further than arms length and I switch back and forth between mech and MVP all day.

I get my stuff sent to work, so when the receptionist sends me an email about mail upfront, I am like a kid on Christmas morning!

 

[Fenway75]

If the USPS website is to be believed, I will be joining this group sometime this afternoon

I've heard so many good things about the MVP, can't wait to put it through the paces!

 

[Catdumpling]

Both of mine will fire with a 0.8 ohm coil.

Mine will fire a .8 ohm coil too, although I don't know how safe it is. IIRC, Innokin says the lowest recommended is 1.2 ohms. Lately I've actually been building my Kayfun coils at 2 ohms; I went back and looked at PBusardo's signal analyzer charts and the MVP was nearly dead-on at all settings with 2 ohm coils. Coils lower than 2 ohms fired at lower wattages than what the MVP was set for. Quite frankly I'm not sure if I've noticed much of a difference, but I figured at the very least a couple extra winds on my coil might cook a little more juice .

 

[clnire]

Anyone that was part of the Vamo group buy from focal ecig, I paid for the tracking and mine shows that it was processed thru chicago sort facility. I'll probably be seeing it in the next 24-48 hours.

Sent from my Galaxy Note 3 via Tapatalk.

YES! thanks for the good news!

pardon the typos, on my phone

 

[Capt.shay]

Anyone that was part of the Vamo group buy from focal ecig, I paid for the tracking and mine shows that it was processed thru chicago sort facility. I'll probably be seeing it in the next 24-48 hours.

Sent from my Galaxy Note 3 via Tapatalk.

Thanks Brooks. Do you know approximately what number you were on the order? i think I was around 650 or so.

 

[clnire]

Looks like I am not getting my kfl mini clone from Fasttech. Shows out of stock now. I started a ticket and got a reply this morning. They don't know when they will get more. I might cancel and spring for the higher priced one but not sure.

pardon the typos, on my phone

 

[VapieDan]

I have to say that there is a small part of me that likes the unexpected arrival time from a China order. Some items are so inexpensive with the free shipping, I like to have 2 or 3 small orders awaiting arrival. Starting to collect Drip tips, trying some different RDA's ( Dripping is my favorite for flavor ). Still haven't gotten that 2nd mech and it has been about 7 weeks with my Turtleship clone, so I have resisted collecting the pricier stuff. I do want a copper mech and dripper though, they are so purdy.

My MVP is never further than arms length and I switch back and forth between mech and MVP all day.

I get my stuff sent to work, so when the receptionist sends me an email about mail upfront, I am like a kid on Christmas morning!

Waiting for vape-mail can be fun. That is unless you really really really need it!

 

[VapieDan]

Anyone that was part of the Vamo group buy from focal ecig, I paid for the tracking and mine shows that it was processed thru chicago sort facility. I'll probably be seeing it in the next 24-48 hours.

Sent from my Galaxy Note 3 via Tapatalk.

The second batch is still ongoing for a day or so if anyone still interested.

 

[brookj1986]

Thanks Brooks. Do you know approximately what number you were on the order? i think I was around 650 or so.

Can't remember off hand. I think i was in the 850-950 range.

Sent from my Galaxy Note 3 via Tapatalk.

 

[VapieDan]

Being an MVP lover I always wanted to try the "Big Boy" aka VTR. Today only 06/24/14 until 11:59 pm pacific time there is a flash sale bringing the price down to $51.01 shipped! Darn close to MVP price! At checkout use FLASH30. Other mods and APVs at 30% off as well.

Vapor Co | For All Your Vaping Needs!

Note: This sale runs to *********** 06/26/14 ************* at 11:59pm Pacific time. It is still available.

 

[Fenway75]

If the USPS website is to be believed, I will be joining this group sometime this afternoon

I've heard so many good things about the MVP, can't wait to put it through the paces!

...and it has arrived! My first thought upon opening it was "Huh. I thought it would be wider," since I've never seen one in person. Beyond that, I'm liking the intuitive controls and rugged feel. I suspect this will become a workhorse, and is almost certain to become my go-to in the car.

 

[butterflydancer]

My boyfriend ordered this for me ..Cant wait till friday when it comes..Was wondering if anyone has bought skins for these and how do they hold up??? Looking for a purple butterfly one.. Saw a awesome one on pintrest...

 

[willowize]

My boyfriend ordered this for me ..Cant wait till friday when it comes..Was wondering if anyone has bought skins for these and how do they hold up??? Looking for a purple butterfly one.. Saw a awesome one on pintrest...

Here's one from jwraps......S25

I do not own any jwraps but they've been doing the wraps for a while and a lot of people use them. Hope this helps.

 

[gerrymi]

I tNever take em off to fill em. And since I don't take it off there's no extra wear. And even with good treads there is a certain amount of wear and tear.

Every heavy vaper with a clone takes it off mebbee 2 or 3 times a day to fill it. I take mine off 2 or 3 times a month to clean it.

When I remove my CartoTanks from my MVP2 it's connector pin is always dry. So...I leave my CartoTanks on it when I fill them. (Plus it gives some "leverage" which makes raising/lowering the tank much easier.)

But...(almost) all my Clearomizers reveal a drop (or 2 or 3) of joose on the MVP2's connector pin when I remove them. (Which I then remove with a Q-Tip.)

So the "basic question"...what's more harmful to the durability/longevity of the MVP2...the wear and tear on its threads with removing/replacing Clearomizers for filling...or...ignoring the build-up of joose on its connector pin by filling the Clearomizers without removal?

 

[Midniteoyl]

My boyfriend ordered this for me ..Cant wait till friday when it comes..Was wondering if anyone has bought skins for these and how do they hold up??? Looking for a purple butterfly one.. Saw a awesome one on pintrest...

I got mine from Ebay.. came from 24/7 Skinz....







And have been on for more than 6 weeks with no scratches or peeling.. everyday use and in the car..

 

[garyoa1]

When I remove my CartoTanks from my MVP2 it's connector pin is always dry. So...I leave my CartoTanks on it when I fill them. (Plus it gives some "leverage" which makes raising/lowering the tank much easier.)

But...(almost) all my Clearomizers reveal a drop (or 2 or 3) of joose on the MVP2's connector pin when I remove them. (Which I then remove with a Q-Tip.)

So the "basic question"...what's more harmful to the durability/longevity of the MVP2...the wear and tear on its threads with removing/replacing Clearomizers for filling...or...ignoring the build-up of joose on its connector pin by filling the Clearomizers without removal?

Yeah my tanks leave a bit of juice on the connectors. That's all tanks, all mods. I'm not really worried about it.

As far as R&R'ing the tanks... IMO, I doubt it hurts unless you really crank them back on (stretching the treads) or you have a bad clone with poorly machined treads. In that case it would be like taking sandpaper to them. Every time you R&R you're damaging them. Albeit maybe just slightly but still damaging them.