iTaste MVP v2 Owners Group

Status
Not open for further replies.

garyoa1

Ultra Member
ECF Veteran
Verified Member
Not bad! I'd miss the telescopic bit of it, but if they don't improve on all connectors (too deep, many things don't make contact either on the MVP or the SVD) it'll be totally useless

Yeah, the telescope is one of my fav features. I unscrew the "scope", replace the batt and continue vaping without a hitch. No tiny end cap to drop, no fighting the spring to re-attach it.
IF I just unscrew the end cap I end up with these "olde" fingers dropping it and I'm searching for half a day and moving furniture to find it. And have a tough time screwing it back on.
 

DavidAmonettNashville

Ultra Member
ECF Veteran
Jan 2, 2014
1,484
2,972
Nashville,Tn
I agree. innokin is one of the best. Thing is I would think if they're going to make a new SVD2 it would look like an SVD. Like the MVP 2 looked like the MVP1.

This design, if it sticks, ain't no SVD! Not saying it won't be better, just different. I, for one am not interested in 50w, or 30w, or even 20 for that matter. At least not interested if I have to pay a premium. To me, that would be a marketing blunder.

I agree that the current design needs work...I don't like the "Flared" look at all...I don't like the tapered top cap at all....BUT, Innokin has proven that they listen to what their customers want/desire....and I believe that they'll make the SVD2 super durable so providing they make the small cosmetic changes that everyone is calling for , A person could own a very good ,long term Superior vaping device
 

gerrymi

Vaping Master
ECF Veteran
Jul 12, 2013
3,917
14,560
The 'Burgh, PA.

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
I think the new SVD looks elegant and ergonomic
made to fit the contours of the hand…

I like the features of a telescopic, but think they look ....-ugly as such...

as previously stated, I have faith in Innokin that they will produce a quality unit
but if they don’t keep the price down, way down I just can’t see it being
a big seller...

as far as a 20w USA chip board with service in California,
if I was in the market, 20w would fit my mold fine…

- http://www.vaporleaf.com/v/vspfiles/photos/iTaste-SVD-Body-2.jpg
- https://fbcdn-sphotos-d-a.akamaihd....720_691828670888648_5922749245750755259_n.jpg

:2c:
 

DavidAmonettNashville

Ultra Member
ECF Veteran
Jan 2, 2014
1,484
2,972
Nashville,Tn
I think the new SVD looks elegant and ergonomic
made to fit the contours of the hand…

I like the features of a telescopic, but think they look ....-ugly as such...

as previously stated, I have faith in Innokin that they will produce a quality unit
but if they don’t keep the price down, way down I just can’t see it being
a big seller...


as far as a 20w USA chip board with service in California,
if I was in the market, 20w would fit my mold fine…

10561720_691828670888648_5922749245750755259_n.jpg

:2c:
What would an effective price point be for a high quality 20watt device? $99.00 ?
 

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
What would an effective price point be for a high quality 20watt device? $99.00 ?


:2c:

lets see, most 15w are around $50
134, VTR, Evic, etc $100-$150

only one close I can come up with at-this-time,
a VV tube mod under $100
- Sigelei 20W 20 Watt Variable Wattage Vaporizer Mod 7 0W 20W 100 Authentic | eBay
- http://cdn2.bigcommerce.com/n-zfvgw...isplay_On__70280.1400452718.1280.1280.jpg?c=2

I’d say to be a hot deal like MVP $60-$90 ?
for me more like $60-$75
in my eyes, big money for any device when I can make do with what I run now
just won’t interest or lure me to purchase one and same with a new MVP


I’m not smoking now with 3.5a and 11w so a Sigelei ZMAX
would take the place of an expensive SVD 2.0, if that’s the case…


I'm not an extreme vapor`er, just what it takes to get it done
cloud chasing, sub-ohmin -- don't need or care about it

but that’s just My Thoughts, and my perspective…

:unsure:
 

sando7

Ultra Member
ECF Veteran
Verified Member
Feb 8, 2014
2,308
2,390
Louisville, KY (PRP)
i think some get confused on some of these DNA devices, sure you can sub with them to a point but they work best at the 1 to 2 ohm range....i get a fantastic Vape with a 1.2 single coil w/28ga at 17.5 watts on my DNA 30.....20 watts is plenty for a great Vape......if you wanna go Low-Sub get a Mec it's built for it....just my :2c:

my ideal price range for a good 20 watt Innokin DNA device would be no more than 75 bucks.....at least i wouldn't pay any-more than that for 1.
 
Last edited:

DavidAmonettNashville

Ultra Member
ECF Veteran
Jan 2, 2014
1,484
2,972
Nashville,Tn
i think some get confused on some of these DNA devices, sure you can sub with them to a point but they work best at the 1 to 2 ohm range....i get a fantastic Vape with a 1.2 single coil w/28ga at 17.5 watts on my DNA 30.....20 watts is plenty for a great Vape......if you wanna go Low-Sub get a Mec it's built for it....just my :2c:

my ideal price range for a good 20 watt Innokin DNA device would be no more than 75 bucks.....at least i wouldn't pay any-more than that for 1.

Remember that the Innokin Dna chip is more advanced than the standard Dna20 chip....Step down circuitry and all... Seems there's another improvement too but I can't think off it right now....Tired tonight.
 

Susaz

Vaping Master
ECF Veteran
Jun 8, 2009
4,857
10,701
Buenos Aires, Argentina
Remember that the Innokin Dna chip is more advanced than the standard Dna20 chip....Step down circuitry and all... Seems there's another improvement too but I can't think off it right now....Tired tonight.

Again, I think the Vaporshark mini is the ideal device if it weren't for the price, 175 is simply too steep for me. IF Innokin did something like that below the 100 bucks price range I'd jump for it in a heartbeat.
 

DavidAmonettNashville

Ultra Member
ECF Veteran
Jan 2, 2014
1,484
2,972
Nashville,Tn
Again, I think the Vaporshark mini is the ideal device if it weren't for the price, 175 is simply too steep for me. IF Innokin did something like that below the 100 bucks price range I'd jump for it in a heartbeat.

$100 bucks or under and I am all over it... Could turn out to be a real "Provari killer" (does anyone still say that?:))
 
Status
Not open for further replies.

Users who are viewing this thread