Official IO6 Atomizer beta thread...

Status
Not open for further replies.

ab357

Ultra Member
ECF Veteran
May 22, 2010
1,932
52
Chgo., IL.
Ab357,
I apologize if my previous comment was inaccurate or naive. In all reality that comment was designed for Wacky Dee. I actually do not know why I began the message with both your name and his because as you can see each segment of my response was tailored to adress his comments and his comments only. I did not mean to aim the idea of flooding atomizers at you. Nevertheless, I found the information you provided very useful.

I recreated your test with 9 drops. I found that some of the excess liquid would leak out, and that the atomizer preformed mostly fine except for the fact that it seemed to heat up at a significantly higher rate. This leads me to believe that adding excess liquid still may or may not be part of the problem regardless of the type of atomizer you use or how you use it.

Oh, I didn't take your post in a negative way. I usually have at least 4 mod setups with different type attys going at any one time. So I'm never vaping solely on one during a session. I thought I had read back around the beginning of the thread that someone said to prime them with 5-6 drops. I usually prime non Penstyle attys with 3 drops.

I did the experiment for my curiosity and that was with an Ike 306 HV. I've been vaping with that atty for at least a couple months and it's still working fine since the 20 drop experiment. However when I pull out my last i06, I will only prime it with 3 drops.

My curiosity revolves also around the fact that neither popped, they just died. the coils were still intact with no visible damage.

The reason I'm here now is to read any developments you guys discover because it seems like it could retire my 306s if I can keep them working. LOL
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,754
50,668
Wash
I thing I would use an abrasive bit or a hone to enlarge it. I'm like you, that drill bit bites in and bram there goes the tip. I suppose if you used the right bit it would be okay.
I never drilled mine and it workes okay but I don't drip that much. When it comes to dripping I listen to Switched.
 
Last edited:

jboyse

Moved On
Aug 1, 2011
48
13
Gilbert, AZ
It gets extremely frustrating to constantly substantiate my claims on a nearly daily basis. For those who know me know I don't post BS.

I am here to help folks as much as I can. I don't have to prove anything, but I do get my knickers in a twist when someone seems to doubt my written word. Remember folks I do not have to post or help people.



I don't get POed at the comments, I get POed at the folks that refuse to admit that perhaps they could be doing something wrong.

If a picture is worth 1K words then a video is worth 1M. Will folks finally concede that perhaps, just perhaps Switcher knows what he is talking about?

Truly amazing!!!
 

Switched

ECF Guru
ECF Veteran
Feb 18, 2010
10,144
2,544
Dartmouth, NS Canada
How exactly do you drill the hole bigger? I tried and cracked mine. Should I put it in a vice and just be really careful? I have a 3/16 drill and wasn't have much success.

Is anyone having no problems dripping with the drip tip unmodified?

Ooops my bad :( I chucked mine in the lathe drilled 3/16" then tapered hole with a #2 tapered reamer. I am truly sorry for your mis-fortune.

It would probably be easier to chuck the DT in the drill while having the drill bit in a vice. I dunno :( (mini lathe)
 

doots

Vaping Master
ECF Veteran
Verified Member
Aug 22, 2009
7,414
2,054
safe-list.com
OK Guyz curiosity was killing the cat here and I just had to break out my HV-I06 now. I put it on my Provari and loaded it with some 100% VG Organic Green Apple juice. I started it out @ 5.6V on my Provari dripping into it with 8 drops to prime it good. ( much less in drops then I normally use to prime an Atty ) I started vaping and wow just WOW, MAJOR MAJOR Vapor plumes and especially great flavor witch kind of surprised me actually how much flavor I'm getting from this Atty!!!

It seems to me way more flavor than a 510 which I normally use and above 5.5 most juices in my opinion star to get muted a little bit and at 6v they get muted more, this just isn't happening at 5.6v so far. Keep in mind I haven't got to 6v yet but right off the Batt I know for a fact I'm getting more flavor than my normal Iken HV-510 which has always been my favorite Atty ( up until now that is ) I found my new dam Atty's in these i06 little Monsters !!! These I06 Atty's are really something, are guy " The I man " has done it once again, " The I Man "= Issac,, continues to lead the pact with Atty's and we are all very lucky to have this guy in the vaping community who continually has a passion to provide all of us with these dynamite cartos/Atty's and god only knows what he is working on next but I will guarantee you one thing, when he puts it out there it shall be excellent for all of us as these I06's are !!!

Thanks once Again Issac you continue to amaze me and many others I'm sure with all you do for us buddy !


-MWA:2cool:

DITTOS MW. Well said!
 

doots

Vaping Master
ECF Veteran
Verified Member
Aug 22, 2009
7,414
2,054
safe-list.com
It gets extremely frustrating to constantly substantiate my claims on a nearly daily basis. For those who know me know I don't post BS.

I am here to help folks as much as I can. I don't have to prove anything, but I do get my knickers in a twist when someone seems to doubt my written word. Remember folks I do not have to post or help people.



I don't get POed at the comments, I get POed at the folks that refuse to admit that perhaps they could be doing something wrong.

If a picture is worth 1K words then a video is worth 1M. Will folks finally concede that perhaps, just perhaps Switcher knows what he is talking about?


Amazing Vid Switched!
 

loft

Ultra Member
ECF Veteran
Verified Member
Jan 31, 2011
2,748
2,814
43
CT
It gets extremely frustrating to constantly substantiate my claims on a nearly daily basis. For those who know me know I don't post BS.

I am here to help folks as much as I can. I don't have to prove anything, but I do get my knickers in a twist when someone seems to doubt my written word. Remember folks I do not have to post or help people.



I don't get POed at the comments, I get POed at the folks that refuse to admit that perhaps they could be doing something wrong.

If a picture is worth 1K words then a video is worth 1M. Will folks finally concede that perhaps, just perhaps Switcher knows what he is talking about?

I believe you and Isaac can stop talking about me behind my back now about my stash of RY4 and vaping habits! So what if I do the same thing with 18mg/24mg................... LOL Awesome video. It's annoying having to constantly disprove myths and what-not and I'll admit, I only average 12 hits on my HV io6 but that's due to how I vape and my long/hard hits.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,754
50,668
Wash
Switcher you are an amazing guy.

amazing-1.jpg
 
Last edited:

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,754
50,668
Wash
Lmao. Too funny. I'm cutting back due to health complications though :(

Sent from my Desire HD using Tapatalk

Me too, I'm getting too darn healthy and it doesn't feel right.

Don't worry Loftie I squealed on 5Card too :) he the one that burnt the hole in the rug :lol: Not sure who F'ed the toilet though as bears poop in the woods :)

It wasn't a very big hole. It was her fault.

burn_baby_burn_tshirt-p235823707664852815q02x_125.jpg
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread