Official IO6 Atomizer beta thread...

[Vaporologist]

Please remember dropping resistance also changes the vaping characteristics designed.

Sure. But those usually tend to be characteristics which favor my vaping preferences, much warmer vapor and greater TH even if at the slight expense of flavor. It's kind of like a comfy SUV vs. a not as comfy sports car. They both have their place in the industry but some prefer higher performance at a slight expense of comfort and possible gas mileage...

No, they are the same size as a 510 therefore the 306 DTs will not fit

Ahh, gotcha. It definitely looked taller but I wasn't sure if it was also wider. Thanks for clarifying. Do we know if there will be different DT colors to choose from?

 

[loft]

Sure. But those usually tend to be characteristics which favor my vaping preferences, much warmer vapor and greater TH even if at the slight expense of flavor. It's kind of like a comfy SUV vs. a not as comfy sports car. They both have their place in the industry but some prefer higher performance at a slight expense of comfort and possible gas mileage...



Ahh, gotcha. It definitely looked taller but I wasn't sure if it was also wider. Thanks for clarifying. Do we know if there will be different DT colors to choose from?

Right now the DT is black; something is in the works for alternate tips though but I haven't seen what colors/etc or even what style it will be.

 

[Vaporologist]

Right now the DT is black; something is in the works for alternate tips though but I haven't seen what colors/etc or even what style it will be.

Cool, black will work to begin with. I wonder if I'll be able to mod maybe an 801 atty tube to use it as a DT just like we've modded 510 atty tubes as 306 DTs...

 

[loft]

I don't have any 801 atty tubes, but the OD of the io6 is 8.30mm at the top (near bridge) and 8.44mm at the base (right above copper/brass lip)

 

[loft]

On AltSmoke BB

Sent from my Desire HD using Tapatalk

 

[Vaporologist]

The DT looks nice. Do you know if there are any plans to make some shorter ones? I like my vapor really warm and prefer to be pretty close to the coil... Also, with a more contoured top, do you ever see juice getting stuck at the top or is that not a problem at all? Thanks.

 

[loft]

The juice hasn't gotten stuck for me, but another member on here said it did for them. It might depend on the thickness of the juice (I'm using IKV RY4) - Not sure about the sizing, sent a message to Isaac to find out.

 

[LegioX]

The juice hasn't gotten stuck for me, but another member on here said it did for them. It might depend on the thickness of the juice (I'm using IKV RY4) - Not sure about the sizing, sent a message to Isaac to find out.

I've filed away at the inside of the drip tip, and this has helped with the flow of juice down it. Also you can bend the bridge to the side a bit since it is in fact pretty close to the top of the drip tip.

although i would be ecstatic to hear about a 'cannon' type drip tip for this io6.

 

[Switched]

If the standard drip tips will not fit, has anyone tried the Cherry Vape Cannon drip tips to see if these might fit? I just tried fitting the Cannon tip over a 510 atomizer but it is definetly just a bit too small.

On the bright side it seems like these atomizers will not cause burnt lips with a shorter 306 drip tip. At least I hope that is not the case.

The standard 306 with shipping cart almost slips into this one, think 510 but with 306 guts but it is not the HH357 and it is not the "hybrid".

 

[Switched]

Sure. But those usually tend to be characteristics which favor my vaping preferences, much warmer vapor and greater TH even if at the slight expense of flavor. It's kind of like a comfy SUV vs. a not as comfy sports car. They both have their place in the industry but some prefer higher performance at a slight expense of comfort and possible gas mileage...

... true

Ahh, gotcha. It definitely looked taller but I wasn't sure if it was also wider. Thanks for clarifying. Do we know if there will be different DT colors to choose from?

He as been in contact with CherryVape.

 

[Vaporologist]

Have any other beta testers received their IO6 atty? When are they expected to be on the website? I need to order some V2 cartos and was hoping to be able to add a HV IO6 to the order... TIA.

 

[Switched]

Have any other beta testers received their IO6 atty? When are they expected to be on the website? I need to order some V2 cartos and was hoping to be able to add a HV IO6 to the order... TIA.

Talk to Isaac. I ordered 10 (5 ea) sight unseen. I will be doing a review of them when I get 'em

 

[Vaporologist]

Talk to Isaac. I ordered 10 (5 ea) sight unseen. I will be doing a review of them when I get 'em

What? You do reviews now? Looking forward to it...

I'll try texting him. Haven't been lucky to get a reply in a while... But I know he is a very busy man. Thanks.

 

[tybin]

he even tested it on a phidias! I'll be watching this thread dear

Hey Vladoogle!
It's been FOREVER!
I would say it's reinventing a 306, but it's not. I started a mission to make a more durable 306 atomizer that can stand the test of time and electric currents where the current fails. 306 is an awesome atomizer, great traits but the durability has always kept the 510 at the top. So the mission was set in place and when it came time to dissect the 306 to the wire, I finally discovered it's true weak structure. By listing the components that need to be changed, we realized nothing stays save for the bridge! and even that needed to be modified. The only thing we kept that is 306 is the style, everything else has been reworked/replaced. This one was based off of a few atomizers by borrowing their traits. This one is very liquid efficient, you only need 2-3 drops per vaping session. IF you drown it past 3 drops it will leak upon refill. Initial fill is only 4 drops. Break in is very minimal as there is no wick that needs to be properly wet before using. All you need to do is get the liquids in circulation. The throat hit does surpass a 306 by tapping into the 510 area. The flavor is on par with an 801 as it remains night and day between a 510 and 801. The airflow is restricted to a perfect level, not airy nor tight right in the middle. This unit will also be accepted by any 510 fitting as it has been tested on a Prodigy V3, Provari, Silverbullet, GG, Ego, Ikon, Ego LCD, Reo Rand, Reo Mini, Empire, Apex Ultra, the BB,Indulgence, Phidias, Standard 510 fittings on home made devices. Once we pieced this unit together the potential was so strong that I contracted another manufacture to produce drip tips by written specifications which came out a little snug and a little loose on others, but even the loosest fitting caused no leaks if used under the standing condition of 2-3 drops. The io6 has been in development for quite a while and will make head way as soon to be standard, this I'm certain of.

As for the 1.5, there's a poll for that

 

[MXBNW]

Standing Buy

 

[Vaporologist]

Standing Buy

Haha, me too!

I just placed an order for some other stuff and added a request in the notes to add one HV to my order. Hopefully he will see it...

 

[MXBNW]

Haha, me too!

I just placed an order for some other stuff and added a request in the notes to add one HV to my order. Hopefully he will see it...

I am heading there now to fill out the notice

Are the listed on the site yet? LOL

 

[Vaporologist]

I usually don't get excited about stuff that hasn't been even released and tested yet but Isaac seems to be really proud of this one. It just sounds soooo good. And Switched ordering 10 of them, just based on what he heard from Isaac, is pretty strong. I'm filled with anticipation!

 

[nocturn4l3030]

!!!!

any potential release date for these??

 

[loft]

I usually don't get excited about stuff that hasn't been even released and tested yet but Isaac seems to be really proud of this one. It just sounds soooo good. And Switched ordering 10 of them, just based on what he heard from Isaac, is pretty strong. I'm filled with anticipation!

Spread the word, these things are awesome. We were talking about getting a prerelease out to a reviewer or two as they are just that great. I'm having trouble testing the eGo-T because I keep wanting to go back to these!