You can put a slight chamfer on the top caps inlet edge, that'll improve the whistle. The low cost means there's room for improvement ^^
I saw an interesting tip on dealing with this kind of situation. Assuming you have a vacuum cleaner with a hose attachment: put a single or double layer of a girl's (or a guy's if the guy is into that sort of thing) stocking or panty hose over the end of the hose and vacuum the area. It should suck up the screw onto the fabric but not into the canister. Never tried it myself, but it makes sense.
... after 37 years, seeing someone instantly bald is kind of freaky. I’ll just ignore it and build some 
Used to do that back in the dark ages with my hard contact lens. Hubs has a magnet wand out in the shop. He uses it to find old nails in reclaimed wood. I’m going to see if that picks them up. A piece of cheesecloth tightly rubber banded over the wand works too. My genius child puts the stocking piece on the wand, then wedges on the attachment... no pantyhose getting sucked into the tube
The other solution is don’t get so excited to try to build you use the bathroom vanity (only bonus, I closed the sink drain 
Yeah I find them much easier. I would stick with the tight coils maybe for now since they are easy for you. Once you are comfortable enough with all the variables then you can change it up. Don't be too hard on yourself. You are doing great.
Last edited:
I have had both. I still have my Athena...
Yes, it arcs at times. No denying it.
But no voltage drop at all, and with the right 18650, quite good, and a true mech squonker, so it's easy to keep in good repair.
Since you seem to have an affinity for mechs, I'd say it will do you just fine.
Bottom fill?? Only the OG Aromamizer V1/V2 was bottom fill, everything after that you unscrew the top cap.
Skip the OG Armomamizer, Supreme / Supreme Lite and go straight for the 25mm Supreme V2 (V-Deck) or 30mm Plus (Postless). There is an optional postless deck for the Supreme, but it is 90 degree rotated and not wicked straight through like the deck on the Plus.
The Wasp was way to finicky with coil size and height so it didn't whistle.
In the end, I could always get some sort of whistle from it by slightly changing the amount of draw.
It's now at the vape shop, living on a OSub Baby for testing new juice.
Letitia,
You might want to take a look at the themis duel coil rta, top airflow postless deck easy to build and Wick ( I managed to do it) .
Built mine up yesterday it's been a really nice RTA so far.
You might want to take a look at the themis duel coil rta, top airflow postless deck easy to build and Wick ( I managed to do it) .
Built mine up yesterday it's been a really nice RTA so far.
Good morning shiners! Sorry to all that today is a Sunday and the post office is closed. But package delivery will resume tomorrow!
Good Sunday morning shiny people, got caught up on the back convo and seeing @NolaMel builds. Think she’s doing quite admirably and she seems persistent so in no time she will have this mastered.
Hope everyone has an enjoyable morning with good coffee and a wonderful vape or 4
Hope everyone has an enjoyable morning with good coffee and a wonderful vape or 4
Similar threads
- Locked
