SUGGESTION BOX - Feedback Thread

[awsum140]

An update to the CE3 is sorely needed. I love these and the size is perfect. juice keeps leaking out of the bottom though especially when refilling. Perhaps make it where the syringe is not needed since it seems that air an air pocket develops that causes the juice to leak out unless it is completely full or kept upside the whole time--that would be quite an Awkward vape.
All in all though I'm Volt for life.

It is amazing the different results we all get with each device. I use CE3s very heavily and have no real leakage issues and they last for quite a long time. I think that a major factor is exactly how we vape. I tend to take long, slow drags from all my devices. My wife, on the other hand, takes multiple very hard drags all the time I loaded some CE3s for her and she couldn't use them...leaked and had little vapor output. Maybe try the long, slow, drag with a CE3. As far as filling them, I use a 5ml or 10ml syringe and mass fill them. 20 to 40 at a time, very quickly.

 

[abracadebra]

you hit the nail right on the head awsum....I totally agree...its all about the way we drag.... Im on the Hard Drag list...

 

[kia2]

It is amazing the different results we all get with each device. I use CE3s very heavily and have no real leakage issues and they last for quite a long time. I think that a major factor is exactly how we vape. I tend to take long, slow drags from all my devices. My wife, on the other hand, takes multiple very hard drags all the time I loaded some CE3s for her and she couldn't use them...leaked and had little vapor output. Maybe try the long, slow, drag with a CE3. As far as filling them, I use a 5ml or 10ml syringe and mass fill them. 20 to 40 at a time, very quickly.

Well, I'm not sure that's the case, but I'll experiment a little with the few I have left and see if that may be for me.

I ordered 10 packs of CE3s after my stash ran dangerously low and received the "new stock" in clear packaging. I figured I was set for months, but I went through them in just 6 weeks. Some drained completely just after filling and hadn't even been vaped upon. Others made it one fill before a second fill saw them leaking everywhere. I've been using the CE3s since they were introduced on the market, so I think I've been pretty successful with them. I just finished out my last box of the "old stock" and am refilling and cleaning like crazy now, but they won't last forever. I reported the issue to SI, but I'm very gun shy about ordering more CE3s, so I'm breaking out my stash of XL cartos.

 

[awsum140]

Kia, regarding the leaking problem, I've been making the initial puncture in the inner silicon seal using a real hypodermic needle then using the blunt tip to fill with. I just filled 20 of the new ones, with the clear packaging, and had no problems with leaks at all. Give it a try, it may solve your problem with leaks at least.

 

[kia2]

Thanks, Awsum! I'll give it a shot. (oops, no pun intended, really!)

 

[JessicaS]

Jessica, I think that's what they were trying to do when they came out with Nanos. Have you tried those yet?

Yes, I just got one recently. They are great, except I prefer clearos that are wickless ( or nearly so in the case of the bottom coil) because I like thicker juices(50/50) sometimes, which causes wicks to become gunked up much quicker.

 

[JessicaS]

It is amazing the different results we all get with each device. I use CE3s very heavily and have no real leakage issues and they last for quite a long time. I think that a major factor is exactly how we vape. I tend to take long, slow drags from all my devices. My wife, on the other hand, takes multiple very hard drags all the time I loaded some CE3s for her and she couldn't use them...leaked and had little vapor output. Maybe try the long, slow, drag with a CE3. As far as filling them, I use a 5ml or 10ml syringe and mass fill them. 20 to 40 at a time, very quickly.

Good point. I drag similar to you, slow and long. I found out the hard way that puffing hard causes leakage of juice in the mouth, which doesn't exactly taste too good. Anyhow, I just filled another one and vaped it until empty and no leakage yet. The real test will come when I refill it. This time I didn't stick the syringe tip as far through, just enough to get it filled. Sometimes I guess it takes a little trial and error and experimentation. If I get leakage again this time, I will try a hypodermic for the next one. I just don't want to give up on the little buggers yet.

 

[Amethyst_Star]

I actually like the CE3's better than the X2 clearomizers. No leakage problems, ever. Even if I fill them instead of my husband (ie: I'm a klutz and prone to having issues with things if I don't have my hubby do it for me).

 

[kia2]

Well, I couldn't get any old stock CE3's, so I just sighed and ordered another batch of the new. Hopefully I was just unlucky the first round. The last CE3 from that round leaked straight out onto one of my X2's. I don't care for the Nano or T3 all that much, as the taste of the plastic tips is just too much for me and I don't like using them. I have my XL blanks, but they certainly are not as convenient as CE3s where I can see the liquid.

Regarding a suggestion for SI, I would really like to see the contact cs problem page under a "secure" page. Phone contact is difficult, and the current page for emails is not a secure page, so my security software blocks me from using it, and I really despise disabling the software to be able to contact SI.

On a side note, Jason w/SI has been good with responding to my messages with a fair time frame.

 

[Imagine]

I will ask them

Well, I couldn't get any old stock CE3's, so I just sighed and ordered another batch of the new. Hopefully I was just unlucky the first round. The last CE3 from that round leaked straight out onto one of my X2's. I don't care for the Nano or T3 all that much, as the taste of the plastic tips is just too much for me and I don't like using them. I have my XL blanks, but they certainly are not as convenient as CE3s where I can see the liquid.

Regarding a suggestion for SI, I would really like to see the contact cs problem page under a "secure" page. Phone contact is difficult, and the current page for emails is not a secure page, so my security software blocks me from using it, and I really despise disabling the software to be able to contact SI.

On a side note, Jason w/SI has been good with responding to my messages with a fair time frame.

 

[3mg Meniere]

Imagine, I am vaping a cinnamon flavor in an X2 clearo, and not having problems with the tank part. However, the juice melted the driptip. Have they considered metal driptip for that model? Right now I vape it without driptip, which won't work when I am out and about.

 

[Imagine]

Not at this time sorry

Imagine, I am vaping a cinnamon flavor in an X2 clearo, and not having problems with the tank part. However, the juice melted the driptip. Have they considered metal driptip for that model? Right now I vape it without driptip, which won't work when I am out and about.

 

[cindycated]

How about offering lower-resistance heads for the T3? Seems to work better on X2s. With the existing heads, I usually have to use them on the Spinner at higher voltage.

 

[krawhitham]

T3S for the x2 battery

T3S bases will fit current T3 units so all you really need to release is the bases and coils for existing users

 

[cindycated]

I heard they're redoing their heads yet again too, to be universal (same heads for eVods, ProTanks and T3S) - if you're thinking of revamping these, just something to think about, to avoid obsolescence...but yeah, that would be sweet.

 

[arilosi]

I use Pencil Toppers on my Volt Batteries to prevent the inside from collecting lint,tiny debris and such when its in my pocket or purse. ( i wouldnt recommend using these for auto batteries) I just use them on my Vx2 manual or spinner.



It would be nice if Smokeless Image sold some sort of Tip Topper for Batteries.

 

[cindycated]

OMG, how cute is that?

Imagine, I think I might've found a new logo for Smokeless Image:

 

[LisaR]

So, I got my Volt kit last week, and I liked it OK, until today. Today, my lower resistance cartos came in the mail, that I had to order from somewhere else. Now, I LOVE it! Maybe you could consider selling some lower resistance cartos (like 2.0 ohms, I'm not talking super low, or anything)? I know using lower resistance will reduce the battery life, but OMG, what a difference in the vapor! I honestly was starting to think that the Volt was not a viable alternative to the Spinner I've been using, until I stuck one of those babies on. Yay!

Also, I know this has been asked before, but could you please, please consider selling white or orange/tan cartos? I know wraps are available, but I just don't want to bother with them, unless I decide to do something fancy, when so many people DO sell white cartos. I picked up my Volt kit to provide an inconspicuous alternative to my bigger, "blingier" set-ups. It would be fantastic if SI could be a one-stop shop for all things 808!

Thanks for your consideration of my suggestions!

 

[WorksForMe]

I got this email after I bought some pet supplies online. I don't know if it's something SI would be interested in, but I thought I'd throw it out there. I'm sure a guarantee like this would make customers feel more comfortable shopping online.

Your Purchase is Guaranteed

As a thank-you for buying, That Pet Place has purchased you a Norton™ Shopping Guarantee. You are receiving this email as a receipt of the benefits provided and described below.

This is not a subscription service and there is no charge, now or ever, for the benefits that have been provided.

Norton Shopping Guarantee
XXXXX XXXXX-XXXXXXXXX

Purchase Date: 8/17/2013 11:21:11 PM GMT
Store: That Pet Place
Order ID: XXXXXXX

This is your official Norton Shopping Guarantee that is provided to you and paid for by That Pet Place.


Your Guarantee Benefits
$10,000 Identity Theft Protection.
Receive comprehensive assistance and financial coverage if your identity is stolen anywhere online or offline. See terms »

$1,000 Purchase Guarantee.
All terms (returns, refunds, shipping, etc) are independently guaranteed up to $1,000. See terms »

$100 Lowest Price Guarantee.
If the published store price drops, the Norton Shopping Guarantee will pay you the difference, up to $100. See terms »


If you have any issues that cannot be resolved with the merchant, you may contact us for assistance. Visit the Norton Shopping Guarantee Buyer Service Center to make a benefit claim within 30 days of your purchase. This guarantee expires 30 days from the date of purchase.



Let That Pet Place know that you appreciate the Norton Shopping Guarantee at no cost.
Say thank you!



What is this Guarantee?
There is no cost to you for these benefits.
It is not a subscription, there's nothing to cancel.
The benefits expire 30 days from the date of purchase.
Terms and conditions
Let That Pet Place know that you appreciate the Norton Shopping Guarantee at no cost.
Say thank you!

The Norton Shopping Guarantee enables online merchants to provide their valued customers, like you, an independently guaranteed shopping experience at no cost to you.



What others are saying
"It's a great addition to the shopping experience, and it's free! This is a big confidence booster!"
--Megan W.

"Thank you ...it really is nice to have additional piece of mind"
--Tom J.

"This is a great idea and great benefits and I will continue to buy from you"
--Debby D.

"I appreciate the customer care and guarantee, and I would lke to thank you so very much"
--Tien S.


Privacy, terms and conditions

The Norton Shopping Guarantee program will NOT use your personal information for any other purpose than to send you important information about this Guarantee. Learn more about our privacy policy.

Some terms and conditions apply to your benefits.

You are receiving this one-time email to inform you of the benefits you received during this online purchase. If you do not want to receive such notifications in the future, you can unsubscribe.

Norton Shopping Guarantee Program | 1611 North Kent St., Suite 803 | Arlington VA, 22209

 

[Imagine]

I will definitely mention it