- Status
Re: Highlander coil for Terminator.
Over in the GG Ithaka thread folks are doing dual coils were the coils from one touch the other with little or no change in resistance. This probably needs to be the first wrap touching the first wrap of the adjoining coil, or 2d, middle , last ect.
I have done it with Ithaka, so I will leave out the wick between the coils, I will do this soon and post results.
Edit: I think I'll add the extra piece of wick to the coil that is on the top side just as I do when making a single coil.
Over in the GG Ithaka thread folks are doing dual coils were the coils from one touch the other with little or no change in resistance. This probably needs to be the first wrap touching the first wrap of the adjoining coil, or 2d, middle , last ect.
I have done it with Ithaka, so I will leave out the wick between the coils, I will do this soon and post results.
Edit: I think I'll add the extra piece of wick to the coil that is on the top side just as I do when making a single coil.
Last edited:
hey was wondering where is the cheapest place in the US for the terminator v2 or nautilus v2?
right, euforia's rebuildable housing and ceramic cup are quite a bit smaller than the term
Back to question with the terminator. I am getting a V2 from Stormy, my question is that is it exact interchangeable from the Ody?
@ Ejuice4cig, yes
All parts interchange between Terminator and Oddy
But with ceramics, housing and center pin, v1's interchange with v1's parts and v2's with v2's parts as far as their parts go.
The complete assembly's will interchange with each other, eg, you could put a v1 Terminator repairable assembly into an Oddy v2 and vise aversa.
My ECF cookies are pre-maturely dying
All parts interchange between Terminator and Oddy
But with ceramics, housing and center pin, v1's interchange with v1's parts and v2's with v2's parts as far as their parts go.
The complete assembly's will interchange with each other, eg, you could put a v1 Terminator repairable assembly into an Oddy v2 and vise aversa.
My ECF cookies are pre-maturely dying
Last edited:
I just got a Euforia...now I don't think I want it. I just like the look of 22mm or 23mm toppers better.
It's much smaller than the term assembly. It's only 17mm (same as penny) assembled.
Got mine from vapor-freak. Here's the translation of their information:
"Attention all parts of the Euforia are not suitable for Nautilus, or vice versa. The Euforia is compatible with extensions of Penelope. The interior part (only Cermaic Holder) is not compatible with Penelope."
Definitely wait for SVC to have them at this point, since shipping took over two weeks from vapor-freak.
Get a 17mm mod to put it on. Makes a great pocket mod since it never leaks.
"The interior part (only Cermaic Holder) is not compatible with Penelope."
So that still sounds like the threading is different which would require a different thread in the base as well as the mouthpiece. Just think here as I don't have one and have sold my Penelopes a while back.
So that still sounds like the threading is different which would require a different thread in the base as well as the mouthpiece. Just think here as I don't have one and have sold my Penelopes a while back.
You know if I could read polish or get the forum to translate I would try to buy 2 or 3 of those. Saw that this morning and its awesome.
Although many of the posts are in polish the guy (user name Vochu) who developed the device had also posted English summaries on some of his posts. And on page 5 of the forum http://www.e-papierosy-forum.pl/upgrade-nautilusa-t39675.html which outlines the device there is an English reference to a link which takes you to the sign up posts. Right now if you sign up you end up on a reserve list presumably for the next round. I have no idea how long one would have to wait but having my name on the list is a start!
Sent from my iPad using Tapatalk HD
I just did exactly as you described in your post and it works fabulously. Thanks for sharing the information. I presume it's a little easier with the Ithaca with the ability to cross coils but I managed to make it work in the terminator. I made one coil on a short piece of wick and place another coil below it on the loner wick which runs through the channels. Ended up at .9 ohms from 2 1.6 ohm coils so not bad. Vape is great and flavor is terrific. My gennies are starting to feel neglected, I wish I had bought my terminators earlier and I would have saved some money on my gennies.
Sent from my iPad using Tapatalk HD
is there a place you can buy the top part which turns the term into a dripper? It's basically a cap that covers the ceramic assembly and you just drip through the mouth piece. and then the bottom piece? maybe its worth to by the entire mini term
the one on the left
Terminator R/A Tank V2- Large
it looks like a regular size terminator, except it just a top tube that covers the assembly and a smaller base.
the one on the left
Terminator R/A Tank V2- Large
it looks like a regular size terminator, except it just a top tube that covers the assembly and a smaller base.
Terminator R/A Atomizer- Small
I suggest to just get an IGO-L instead.
The ceramic housing assembly is the same as a Term but the base of small Term is smaller than a Term so that cover wouldn't fit a large Term anyway
I suggest to just get an IGO-L instead.
The ceramic housing assembly is the same as a Term but the base of small Term is smaller than a Term so that cover wouldn't fit a large Term anyway
Last edited:
- Status
Similar threads
- Locked
