Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

[dwcraig1]

What am I doing wrong here, my terminator seems to give me a burnt taste if I dont suck the mouth piece hard enough. I have it at .8 ohms, 6 small wraps, 3mm silica wick with another wick ontop of that 3mm wick missing one strand, and one turn out on the mouth piece.

I looked at some of your earlier posts to see if you have version 1 or 2, the post about the post being brass looks like v1 but I'm not sure so which version Terminator do you have?

Here is my 0.8 ohm Term, this has the widest channels of my three Terminators, it vapes the same as my Ithaka which has the same configuration.

 

[dwcraig1]

Is nickel nr the way to go , thats all that came up on eb with a quick search

Not sure there either but nickel is in everything (alloys)almost even stainless steel
Think "Nichrome wire"

 

[meowmixmeow]

I looked at some of your earlier posts to see if you have version 1 or 2, the post about the post being brass looks like v1 but I'm not sure so which version Terminator do you have?

It's a v2 ceramic dw =). UA72's idea on resolving the issue has worked for me. On a fully charged battery, I open up the mouth piece by two turns, and close up the air control on my mkb-ts and now, I'm in flavor country. I then adjust the air control and juice control (one turn open from closed) accordingly to how much juice I have in my battery. Thanks to you all who helped me out, I've been plagued with this issue for the past 2 days, making new coils in stupidity. Offtopic, but now, I shall troll the bt804 thread to figure out why I'm getting dry hits on that rba.

 

[Caveman Mike]

You know, Stormy has the ready wires....50 for like 8 or 9 bucks...I think.

I have a wire welder for joining the wires, so my twisting days are over. And in a few weeks I should have my kayfun conversion kits for both of my Terms.

i emailed the guy doing the conversion kits and he said mine has shipped. He gave me a tracking number but I'm not sure what they use for mailing. I am 117 on the list. What number are you?

 

[Technonut]

i emailed the guy doing the conversion kits and he said mine has shipped. He gave me a tracking number but I'm not sure what they use for mailing. I am 117 on the list. What number are you?

I was 98 or something close to that... I just checked PayPal, and no shipping notification. I'm hoping since you're a higher number, that my kit has also gone out.. It would be nice to have an update on the Polish forum though...

 

[Caveman Mike]

I was 98 or something close to that... I just checked PayPal, and no shipping notification. I'm hoping since you're a higher number, that my kit has also gone out.. It would be nice to have an update on the Polish forum though...

it would b nice if there was updates on the thread. I haven't seen any though. Only updated list. Looking forward to getting the kit though. I don't use my term because I don't like the taste of the metal mouthpiece. Will b nice to use my own drip tip on it.

 

[Sunger]

Lol makes me want to buy a nimbus right now.

 

[UA72Riddle]

This was posted this morning by Vochu....is in the "Upgrade Nautilusa" thread.

"Hi Guys
All upgrades up to number #120 on the list have been sent - I will be posting tracking numbers today late evening (GMT). Probably I will be able to send today another 2-3 packages. I've got a 1-2 days delay - the reason as usually - these small nuts with two threaded holes - so all upgrades I wanted to send today I will be sending on Monday (or even on Tuesday)."

 

[UA72Riddle]

i emailed the guy doing the conversion kits and he said mine has shipped. He gave me a tracking number but I'm not sure what they use for mailing. I am 117 on the list. What number are you?

I'm #127 on the list. Not sure why everyone isn't getting tracking info.

 

[dwcraig1]

That was fast

 

[eratikmind]

I am 2xx on the list. As I have received 2 Kayfun Lites, I may opt out of the list and use the upgrade kit monies to buy another K Lite.

- Andy

 

[Caveman Mike]

How much was the k lite? How do u like it? Does it have an airy draw?

 

[eratikmind]

How much was the k lite? How do u like it? Does it have an airy draw?

From inTaste, I paid 62.98 euro for the K Lite and 11.80 euro for shipping. Ordered it at the initial launch on Saturday and received it Wednesday morning via FedEx.

At almost half the price of the Kayfun 3.1, the K Lite is going to sell more, in my opinion. The draw suits me perfectly. Actually, the K Lite's draw is the same as my Term C V2 when mounted on my provari mini.

- Andy

 

[upsetter21]

I was 3rd on 2nd batch (currently in progress) for Vochu's oddy-fun kit. I haven't checked the Polish forum, but wanted to chime in that I have no tracking yet either. Not sure where to expect to look for it, since my last correspondence with the modder was via e-mail.

I'm giddy, but I trust this guy is moving as fast as he can. Compared to some other projects I've followed this one has been actually lightning fast.

 

[UA72Riddle]

Had a great time a Vape A Palooza tonight.....got to meet some great people...including Stormy. Sat around and had beer and pizza with Matt from Epipemods and Scubabatdan, while watching dan make up some porous ceramic wicks and coils in a few peoples new devices. First Vape Meet for me....wasnt what I expected, but was still a good time shooting the breeze with fellow vapers. I was surprised to see that I was the only one with an MKB. Cheap mods appeared to be the theme most of the night....I was the only one really with a few high end mods, besides Matts gear and Dans Provari. Of course, my MKB/Term was about all i used.

 

[dwcraig1]

https://www.vapor-freak.de/Neu-im-Sortiment/Hercules
7 Hercules' left
View attachment 227145
Ithaka clone

Someone, even I think I said it before, that these are made by Tobeco and not Rainbow. I was looking at a link to the Tobeco Oddy clone and low and behold there it was. I just hope they did an exact clone on this one and have learned from the past.

Here is a link:
http://tobeco.en.alibaba.com/productgrouplist-215762299/oddy.html#products
I swear some of the pictures they use are of real GG products.

 

[deezdrama]

Got my replacement termc yesterday ( had a cracked mouthpiece on first one ) just built a coil twice.... I keep getting leaking/gurgling and its dripping juice right out of the pos post.

Dont know what im doing wrong. All I have is 1 or 1.5mm wick so im using 4 pieces, 2 cut off at the cup and 2 running the channels.

Getting frustrated.... I have some 2mm hemp I might try or try to stuff 3 or 4 wicks down the channels.

 

[dwcraig1]

Got my replacement termc yesterday ( had a cracked mouthpiece on first one ) just built a coil twice.... I keep getting leaking/gurgling and its dripping juice right out of the pos post.

Dont know what im doing wrong. All I have is 1 or 1.5mm wick so im using 4 pieces, 2 cut off at the cup and 2 running the channels.

Getting frustrated.... I have some 2mm hemp I might try or try to stuff 3 or 4 wicks down the channels.

As long as it's not because the positive post is loose in the ceramic housing. You also can be sure it's not related to what in the way to what wicks are in the channels, it is the top o-ring not sealing for whatever reason and letting air enter the tank.
The reasons are usually the mouthpiece is off center or the collar is not tight

 

[skigro]

Rainbow makes them as well. I ordered one on a co-op yesterday. http://www.rainbowheaventec.com/sdp/1474662/4/pd-6042032/11812050.html

 

[dwcraig1]

Rainbow makes them as well. I ordered one on a co-op yesterday. iThaka atomizer - HOT Sale e-cigarettes - Product Catalog - Shenzhen RainbowHeaven Technology Co., Ltd--electronic cigarette, e-cigarette, electronic cigarette suppliers

That's good to know, maybe I'll get lucky, then again maybe it's the same company with different names.
Germany is EU, I'm nervous