Bulli A2-T
- Thread starter BigBulli
- Start date
- th_trl_thread_readers 0
- Status
Nice clean taste like the Raidy's genisis and wicks like a proper silica rope candle....
I was looking for a miniature kanthal connector for a ce2 so I don't have to solder every new coil I make when I came across this. If I haven't already put over $1000 into other mod parts and tools recently I'd be working on one of these right now. Too many projects at the moment, but maybe some day I'll have the time to make one.
www.thewickstore.com now has 1/16" fiberglass wick in stock I just ordered a 100 yard roll for $40 with shipping, that's $0.13/ft
Last edited:
Just wondering as I have no experience with these, will
this atomizer fit on a standard 510?
Or will I have problems? Or is it bigger than a standard atty and will just look goofy on a normal 510?
Sent from my PC36100 using Tapatalk
this atomizer fit on a standard 510?
Or will I have problems? Or is it bigger than a standard atty and will just look goofy on a normal 510?
Sent from my PC36100 using Tapatalk
Hmmm, thats nothing compared to what I bought. About a year ago I bought 100m of 6mm twisted glass fibre reinforced silica rope. The rope consists of 9 strands of 2mm twisted silica rolled together. I use about 50mm single strand every two weeks. That means i have close to 900m of usable rope wick... At 20 wicks per metre x 900m it should last 16 lifetimes.... And dirt cheap. Cost me around $15. Don't ask where please... 
Not too sure my supplier will ship outside SA. But you never know. I may have enough to support all ECF members for 3 years!
Not too sure my supplier will ship outside SA. But you never know. I may have enough to support all ECF members for 3 years!
DS, you asking about the Bully? It looks the same diamter as the ego battery to me. About 13mm or so. Std 510 battery would be dwarfed I think...
Haha alright thanks. Might have to see if I can make a repairable standard 510 atty
Sent from my PC36100 using Tapatalk
Sent from my PC36100 using Tapatalk
There may be some ideas here for you: http://www.e-cigarette-forum.com/forum/atomizer-mods/120072-atomizer-cartomizer-life.html
It's quite an old thread but the idea of pins and needles started from making a repairable 510 atty. Good luck!
Here is my a2 drip tube with a vapemate attached:
It measures .905" if you don't include the atomizer threads. It also takes an 801 tip not a dse701. I still have to polish it bit it works great, drips right on the coil and the air hole is lined up perfect.
Edit: the caliper in the picture show the measurement with the atomizer threads, the angle of the camera makes it look other wise.
It measures .905" if you don't include the atomizer threads. It also takes an 801 tip not a dse701. I still have to polish it bit it works great, drips right on the coil and the air hole is lined up perfect.
Edit: the caliper in the picture show the measurement with the atomizer threads, the angle of the camera makes it look other wise.
Last edited:
I don't yet have an A2. I would like to buy one and use it with both standard cartridges and with tanks.
Should I buy an "A2 Atomizer" and a "A2 update kit to A2-T" in order to use both storage systems?
I've seen some postings that talk about a hole needing to be drilled in an A2 in order to update it for the T kit. Is this only with older units or if a hole is drilled does this make it unusable with standard cartridges?
If I'm trying to do too much with one unit, I could buy both but hope to not spend so much.
Should I buy an "A2 Atomizer" and a "A2 update kit to A2-T" in order to use both storage systems?
I've seen some postings that talk about a hole needing to be drilled in an A2 in order to update it for the T kit. Is this only with older units or if a hole is drilled does this make it unusable with standard cartridges?
If I'm trying to do too much with one unit, I could buy both but hope to not spend so much.
The A2-t update kit does not come with an air hole drilled in it because you need to make sure it lines up with the coil on your A2 just right, you could try and contact Cetin through e-mail and see if he can have your A2-t update kit drilled to match up with the a2 you are purchasing. The hole needs to be drilled on the side of the piercing plate section, this is not used with the A2 just the base is. look back at the videos on page 1 of this thread. The A2 uses dse701 carts if you want to use 510 drip tips and carts you need this: 701 mouth piece to 510/901 drip tip adapter The A2-t only excepts ego type a tanks(or ego type a drip tips if you pop out the piercing plate) at the moment, an upgrade for ego type b tanks will be available eventually.
Last edited:
Trading/selling a2-t and vapemate with lot of extras if anyone is interested: http://www.e-cigarette-forum.com/fo...o-t-atomizer-vapemate-direct-drip-devise.html
- Status
Similar threads
- Locked
- Locked
