Bulli A2-T

Status
Not open for further replies.

rpittman

Senior Member
ECF Veteran
Verified Member
Mar 14, 2010
101
17
georgia
OK, my bulli want fire .Now with it on a ego bat (no coil )I check with meter and I have power .Put a coil on it no power.Put just a piece of 32 awg kanthal on no fire no power.I get power until I put wire on it. I have check pos to pos with meter there is curent neg to neg there is curent until I conect wire and nothing.It this way no mater what bat I use.I'm lost as what the @#%$^%$%% is going on.Pleas help.
 

Slinger

Full Member
Sep 7, 2011
26
3
Hibernia
OK, my bulli want fire .Now with it on a ego bat (no coil )I check with meter and I have power .Put a coil on it no power.Put just a piece of 32 awg kanthal on no fire no power.I get power until I put wire on it. I have check pos to pos with meter there is curent neg to neg there is curent until I conect wire and nothing.It this way no mater what bat I use.I'm lost as what the @#%$^%$%% is going on.Pleas help.


It's the Kanthal wire, believe me i had the same problem before.
Another Bulli user had same problem recently and i told him same thing, problem solved.
Try it with Nichrome .20 and you won't have that problem.
Try it with .15 Kanthal with say 4 turns and you be fine as well.

The .20 Kanthal is the cause of it.

Had been using eGo battery as well.
 

rpittman

Senior Member
ECF Veteran
Verified Member
Mar 14, 2010
101
17
georgia
It's the Kanthal wire, believe me i had the same problem before.
Another Bulli user had same problem recently and i told him same thing, problem solved.
Try it with Nichrome .20 and you won't have that problem.
Try it with .15 Kanthal with say 4 turns and you be fine as well.

The .20 Kanthal is the cause of it.

Had been using eGo battery as well.

I'll haveto order some,!@#$%^& , I just bought the kantal.
 

Slinger

Full Member
Sep 7, 2011
26
3
Hibernia
I'll haveto order some,!@#$%^& , I just bought the kantal.

Am sure you have somewhere in the States to order from, this is the one i get delivered from Poland.
10 Mtrs Nichrome 80/20 Resistance Wire 0.20mm 0.0079in | eBay

6 turns gives me on average 1.7 Ohms with Bulli a2.

Was strange with the Kanthal D .20, on one eGo battery it was fine but on another it was not.
Done numerous perfect coils, sometimes it would glow but soon as i put juice on it would not fire. Mostly it would not fire at all.

Nichrome worked no problem as well as Kanthal D .15.
 

Huffelpuff

Vaping Master
ECF Veteran
Verified Member
Aug 27, 2011
3,760
3,153
Philadelphia Burbs
Hey all.. just got a bully from the classies but don't have a mouthpiece. It's the older model, I believe, with just two screws and no hole for mesh. Can anyone tell me if the DSC 701 blank cartridges will work for a mouthpiece? Do any of the Ego mouthpieces work for the Bully A2?

Many thanks!
 

Nicblazer

Super Member
ECF Veteran
Verified Member
Aug 28, 2011
839
1,216
Indiana
Hey all.. just got a bully from the classies but don't have a mouthpiece. It's the older model, I believe, with just two screws and no hole for mesh. Can anyone tell me if the DSC 701 blank cartridges will work for a mouthpiece? Do any of the Ego mouthpieces work for the Bully A2?

Many thanks!



Here, Huffel : 701 mouth piece to 510/901 drip tip adapter


Get one of those and you gonna be able to virtually use any 510/901 drip tip on your A2. That is if you decide to go on a dripping path :)


Edit :OMG ! Never mind. Just noticed that you wrote older A2. Sorry about that. Don't mind my link :facepalm:


Edit 2 : Actually, they will work. For a minute there I got the A2 confused with the A1. What a freaking mess. I swear that this is my last edit.
 
Last edited:

Tezcatlipoca

Ultra Member
ECF Veteran
Verified Member
May 12, 2012
2,326
5,368
Riverside, CA
Hi all! I just wanted to say that I got my first A2-TM in the mail today. I ordered it May 1, so the shipping to California was much faster than expected. This is my first venture into the wonderful world of rebuildables. The first attempt to build a coil was an utter failure, but I got the hang of it with the second try, and now it's vaping like a champ! So far I'm very pleased with my purchase, and I would like to thank you all for your helpful and informative posts on this thread!
 

heliguy

Senior Member
ECF Veteran
Verified Member
Jun 1, 2011
225
123
chicago
Anyone Know if this will close on a Darwin? Just watched a video review on these. I think Im in love....

hahah!

Truth is Im sick of dripping, but Im also sick of Burnt Filler in Cartos, and I hate all things CE2.

I just bought a 3.5ml tank and it closes perfect on the Darwin. Wondering if this will do the same.

I also use Alien Vision 555. I add about 10percent PG to thin it down. Will this wick fine with VG liquid?

Also - I was a little confused on there site. Do they have an English Version? I was using google to translate. Does the Tank Cartridge come standard on these or is it an Upgrade?

I think I just found it. I need the A2TM correct? Is the whistle tip the only tip you can use with this?

Also - How much extra coil and wick should i buy? If I buy....
 
Last edited:

AlmightyGod

My friends call me A.G.
ECF Veteran
Verified Member
Nov 23, 2010
10,685
9,506
Vaping Heaven
Anyone Know if this will close on a Darwin? Just watched a video review on these. I think Im in love....

hahah!

Truth is Im sick of dripping, but Im also sick of Burnt Filler in Cartos, and I hate all things CE2.

I just bought a 3.5ml tank and it closes perfect on the Darwin. Wondering if this will do the same.

I also use Alien Vision 555. I add about 10percent PG to thin it down. Will this wick fine with VG liquid?

Also - I was a little confused on there site. Do they have an English Version? I was using google to translate. Does the Tank Cartridge come standard on these or is it an Upgrade?

I think I just found it. I need the A2TM correct? Is the whistle tip the only tip you can use with this?

Also - How much extra coil and wick should i buy? If I buy....

I use it on a Provari, but it should close on the Darwin...might need an extension.
I use Boba's in it, and I had to play a bit to figure out what works, but feeds just fine.
Click the German flag at the top and there is an English page.
The kit comes with a couple of tanks in the "T & TM" models.
The TM uses an eGo Type B tank....it's the only tank for it AFAIK.
The wick Cetin sells is excellent. I bought several packs of it.
The wire is good too, but you can buy Kanthal or NiChrome in the US for much cheaper.
:)
 

Tezcatlipoca

Ultra Member
ECF Veteran
Verified Member
May 12, 2012
2,326
5,368
Riverside, CA
I also use Alien Vision 555. I add about 10percent PG to thin it down. Will this wick fine with VG liquid?

What a coincidence! I just used that very juice on the first coil and wick I built yesterday. It was straight from AVE, no thinning or anything, and it wicked just fine with no dry hits. Much better than on my old eGo-C.
 

heliguy

Senior Member
ECF Veteran
Verified Member
Jun 1, 2011
225
123
chicago
Awesome! Thanks for the replies.

Also - AVE 555 is the only juice I cant get sick of. Its a staple for girlfriend and myself.

I have tried so many different liquids and I get sick of all of them. Even Bobas I got sick of after a month or two.

I did just order a small bottle of AVE C&D. Its actually really good to. Its like a less sweetened 555.

Now to convince myself to shell out the money for this bad boy.
 

AlmightyGod

My friends call me A.G.
ECF Veteran
Verified Member
Nov 23, 2010
10,685
9,506
Vaping Heaven
The other thing holding me back as its pretty pricey..... This does hit like a normal Atty Right. Im picturing IKVs cannon series. Which I love. I just want to make sure its nothing like wicking on a the CE2 types. Horrible wicking and horrible flavor and horrible TH!!!

If you want easy...stick with Chinese attys.

If you want to play a little,but have total control & an awesome vape, then get a Bulli.

Maybe find a used one in the classifieds if you are really in doubt. Many people give up quickly, but it's worth every penny to me. :2c:
 
Status
Not open for further replies.

Users who are viewing this thread