Maybe mine will come tomorrow , please? Lol I can only dream
---
I am here: http://maps.google.com/maps?ll=32.588324,-83.664113
---
I am here: http://maps.google.com/maps?ll=32.588324,-83.664113
Bulli A2-T
- Thread starter BigBulli
- Start date
- th_trl_thread_readers 0
- Status
Shes here!but for the life of me I cant get her to wick right and I get a burn taste, must have made 3 coils in 10 mins. easy to work with but I can't get it to wick, I tried using only mesh on the spike but it still wont wick 
Shes here!but for the life of me I cant get her to wick right and I get a burn taste, must have made 3 coils in 10 mins. easy to work with but I can't get it to wick, I tried using only mesh on the spike but it still wont wick
Try this method I posted http://www.e-cigarette-forum.com/forum/showthread.php?p=4295310 Bulli A2-T
Works a lot better for me than anything, goes right into the cart (just gotta cut it to the perfect height)
I use just one piece of wick wrapped in the SS mesh, wrapped as loosely as will fit in the spike. The wick has to be pushed down to the coil to work correctly. It took a little trial & error, but you'll see what I'm saying.
still cant get it to work, goin to work now. I'll get back to it monday, pretty depressed about this
Might ream the hole in the cart.
If it's too small, that could be the problem.
If it's too small, that could be the problem.
Shes here!but for the life of me I cant get her to wick right and I get a burn taste, must have made 3 coils in 10 mins. easy to work with but I can't get it to wick, I tried using only mesh on the spike but it still wont wick
That's good news that you got yours. That means mine should be here at the first of next week hopefully. Hope you get it working great!
---
I am here: http://maps.google.com/maps?ll=32.588338,-83.664129
stupid question: How does the air flow? I use cartos and atties, never used an atty tank. Lookin at that mouth piece I'm stumped on how you get the vapor from the coil to your face. does it gurgle up through the juice in that tank?
There is a 1mm hole in the middle section of the Bulli. I would compare it to the 901 atomizer.
yes I did, also I find the draw to be perfect on my p+500, perfect. Now I just need her to wick and I'm golden
ok she is now wicking perfect with dekang pg mix, which I think is 25%vg. I was using primevaping caramel 40%vg and couldn't get it to wick right. I'm using my own 400 ssmesh with no wick in the spike and she works great. I cannot stress enough how much easier it is to change the coil.
I just bought a Bulli A2 from a ECF member last week and It came in yesterday, It has the 701-510 DT Adapter and I am loving it so far!! It was his backup so it still has the OG wick and coil and it is performing very well IMO... He is sending me the cartridges for it because he had forgot to send them in the original package but to be honest I doubt I will ever use them!! I might go ahead and buy the T or the Mega T addition for it though!! The only thing I wish is that since I am using it for dripping only, is that the Tube was about half the length!! Buy either way the flavor and Vapor is amazing and I am so happy I have this now.. I have it on my Provari so I have been messing with it at all Volts right now I The A2 came with a 2.5Ohm coil and I am using it at 4.1v and for me it is Rocking!!!!
A2's are grand aren't they? Dspin really needs an A2, especially as a reward for all of his patient waiting. I am sure that one day soon Dspin will receive his reward and find the joys that are to be had using an A2.
Congratulations everyone who was received their A2. A special congratulations to Fuginazole for scoring one of the now rare 701-510 drip tip adapters.
Congratulations everyone who was received their A2. A special congratulations to Fuginazole for scoring one of the now rare 701-510 drip tip adapters.
- Status
Similar threads
- Locked
- Locked
