maybe im wrong, but isn't the bottom and top 22-23mm and the middle 25mm?So Whats the Verdict? Inquiring minds want to know?
Still waiting here My Tracking # still says left Hong Kong on the 5th
The Supreme is 25MM, Will only look good on bigger mods
Hastur RDTA from Cthulhu Mods
- Thread starter HalfBaked
- Start date
- th_trl_thread_readers 0
- Status
Thats the Hastur 22mm base 23mm middle section. The Supreme is 25mm
So Whats the Verdict? Inquiring minds want to know?
Still waiting here My Tracking # still says left Hong Kong on the 5th
The Supreme is 25MM, Will only look good on bigger mods
I haven't had a chance to clean and build mine yet. : ( Boooo!
The kill joy for me, concerning the Aromamizer and others like it is, the diameter of the base. 23 to 25mm base designs are out for me. The mods I want to own are designed for a 22mm atomizer base. My coil choices are also designed around a smaller deck size; don't have wishes to go any larger.
Let Us know, what you think when you get around to building it.
22mm atty's have a nice clean look on most mods
My V2's look excellent on my VT200's I don't mind a few bigger atty's in my collection, I have a few bigger mods with 1300mAH batteries that the 23-25mm look good on too
You might be surprised how many mods support a 25mm atty. Most of mine do. Even the little ipv d2 looks fine with one.
So can anyone give me their thoughts on it? I am about ready to order one I really like the looks of it and they always have good ideas on their new atty's.
Out curiosity I picked up one of these from vaporDNA. She's not the best looking tank I have by any means. The whole pull up top and side fill business is kind of a pain, the afc whistles kinda loud, and she's got some sharp-ish edges on her... I'm pretty sure they had the wrong o-ring on the chimney too so I swapped it with a spare from the extras baggy. All of that being said, she has a decent capacity at 6.7ml and flavor is pretty darned good.
Cleaned and built mine last night; very little machine oil, so it was an easy clean and get going. The unit came apart and reassembled easily. For the most part, it's a really substantial UD Bellus with a Steam Crave Aromamizer juice flow.
Mounted a SS, dual 24ga., single 10 wrap, spaced coils = .4 ohms. Wicked with rayon; wick tails meeting in the middle on the deck.
It's a definitely a lung hitters atomizer. I had to choke the AFC down to about half after a few pulls. Also, seeing 3mg Nic mixes in my future.....got quite a buzz testing this thing with 6mg juice! I know better, but didn't have any 0 to 3mg juice ready to go!
The only thing that chaps my .... is filling this atomizer. Doesn't matter.....top fill or bottom fill, ya gotta go slow and steady or you'll have issues with the juice splooging. No way around it. Typically, I use a 40PG/60VG mix. I feel sorry for folks who use a max VG juice with this this tank.
For me, all atomizers should be able to be filled with the standard eye dropper which comes with most juices bottles today. Oh well.....I'll get over it.
In the end, I'm sure I'll enjoy it, even with the juice filling issues. No atomizer is perfect..... *shrug*.
For everyone who has trouble filling this rta:
Fill it from the bottom. Just screw the top part with the glass away. The oring for the glass is tight enough, so you don't even have to press the glass down while filling.
Now you can fill from any bottle
Gesendet von meinem D6603 mit Tapatalk
Fill it from the bottom. Just screw the top part with the glass away. The oring for the glass is tight enough, so you don't even have to press the glass down while filling.
Now you can fill from any bottle
Gesendet von meinem D6603 mit Tapatalk
Ok so apparently the little o-ring I changed on the chimney allowed s slow leak into the coil chamber. I poured molten hot juice on my finger this morning. I've tried putting the original o-ring back on but when I try to screw the base down part of the o-ring sinks into the connection and part bulges out into the tank. That's what it was doing before I swapped it for the smaller one. Any ideas?
My new Bachelor did that after I swapped the blue o rings for the black. I lubed it good with juice and was able to get it in right.
Hopefully you can see in the pic above what I mean. It's like that o ring is too big, but the other one was too small
Stole a different o-ring from my pile of mystery extras. This one seems to fit more uniformly. Here goes nothing.
Came across this review, his doesn't even look like it has an o ring where the chimney goes into the base.
I often use Chapstick or Vaseline. Since that particular o ring was in the tank I used the juice I filled it with. Wasn't sure I wanted Chapstick on my coils, lol!
- Status
