Tootle Puffers, Redux (The Sequel)

[Oregon Linda]

Did it last longer per charge with dual 18350's or a single 18650?

My VAMO always lasted a lot longer with stacked 18350s than with an 18650. I would imagine your mod would be similar.

 

[Oregon Linda]

There is one: the Dani ) But, it too is quite expensive. Though a Dani paired with a kayfun 3.1 (lite+) is a beautiful combo!

Do you have pictures, Muru? I don't think I've ever seen or heard of a Dani.

 

[GeorgeS]

Well fine.. I'm taking my coil and going home

(sigh)

The highest stock ohms my coils have is 1.8 - contest is +2.0ohms - I even went so far as winding a few trying to hit the target - with no coil winding I'm out.

 

[Rixsta]

Morning peeps, still decorating and playing Daddy daycare, busy busy..

Holly Vapes, 5 more pages to a hundred, Kattykins, part 3 is just around the corner

 

[TrollDragon]

Somehow that name seems appropriate

I have only one question about that mod. Why?

Because it can be done...

 

[TrollDragon]

Well I managed to get a fix for the TC problems on the eVic VTC Mini... It's called an IPV D2.

Not a Tootle Puffer friendly mod as it has no step down in Power Mode, but does in TC Mode and that is what I am using.

 

[kates]

Do you have pictures, Muru? I don't think I've ever seen or heard of a Dani.

Dani (basic) and kabuki. They are excellent and a bonus is they are really small. Above has an 18500 in and is about the same size as a provari mini (with 18350). The pipelinepro is I think identical to the dani (apart from markings).

 

[Rixsta]

View attachment 495132
Dani (basic) and kabuki. They are excellent and a bonus is they are really small. Above has an 18500 in and is about the same size as a provari mini (with 18350). The pipelinepro is I think identical to the dani (apart from markings).

K K Kubuki looks really nice on that mod.

 

[Boden]

View attachment 495132
Dani (basic) and kabuki. They are excellent and a bonus is they are really small. Above has an 18500 in and is about the same size as a provari mini (with 18350). The pipelinepro is I think identical to the dani (apart from markings).

A Pipeline Pro 2 is on my list as soon as they get the software sorted.

 

[Boden]

Well I managed to get a fix for the TC problems on the eVic VTC Mini... It's called an IPV D2.

Not a Tootle Puffer friendly mod as it has no step down in Power Mode, but does in TC Mode and that is what I am using.

Are you trying to use a Kayfun v4 with temp control?

 

[GeorgeS]

Are you trying to use a Kayfun v4 with temp control?

No trying - it works fine here with ether Ni or Ti. Then again what I have is not really a Kayfun v4 but rather a clone of one. I just had to get one to see what all the fuss was about even if just about every B&M in the area recommended against it as they "leak".

 

[Boden]

No trying - it works fine here with ether Ni or Ti. Then again what I have is not really a Kayfun v4 but rather a clone of one. I just had to get one to see what all the fuss was about even if just about every B&M in the area recommended against it as they "leak".

You must have the Tobecco with the silver spring.

 

[GeorgeS]

You must have the Tobecco with the silver spring.

Yup, I think so. I'm happily puffing on 20J 410F as I type this.

Sadly the last time I mounted/dismounted it I over tightened the juice control so will have to revisit that when I get home tonight - I'll take the Lemo2 with me to work.

 

[Boden]

Yup, I think so. I'm happily puffing on 20J 410F as I type this.

Sadly the last time I mounted/dismounted it I over tightened the juice control so will have to revisit that when I get home tonight - I'll take the Lemo2 with me to work.

When that happens I grab a small screwdriver that fits in one of the air holes to pop it loose when it gets stuck. Just grab the bottom ring and use the driver as a small lever.

 

[TrollDragon]

Are you trying to use a Kayfun v4 with temp control?

Yup sure am...

I have done tubbyengineer's spring mod on my Infinite Version.
https://www.planetofthevapes.co.uk/.../60652-kayfun-4-resistance-stabilisation.html

There is also a Spring Update from Steam Tuners.
http://www.steamtuners.gr/products/kayfun-v4/by-steam-tuners/125-kayfun-v4-spring-update

AWE makes a spacer replacement.
https://squareup.com/market/AWEKillerModz/kayfun-spring-delete-spacer

But if I had an Authentic I would get one of AMDTrucking's replacement center pins, they look top shelf!

https://www.e-cigarette-forum.com/f...ayfun-v4-clones.634516/page-222#post-16565208

 

[Boden]

Yup sure am...

I have done tubbyengineer's spring mod on my Infinite Version.
https://www.planetofthevapes.co.uk/.../60652-kayfun-4-resistance-stabilisation.html

There is also a Spring Update from Steam Tuners.
http://www.steamtuners.gr/products/kayfun-v4/by-steam-tuners/125-kayfun-v4-spring-update

AWE makes a spacer replacement.
https://squareup.com/market/AWEKillerModz/kayfun-spring-delete-spacer

But if I had an Authentic I would get one of AMDTrucking's replacement center pins, they look top shelf!

https://www.e-cigarette-forum.com/f...ayfun-v4-clones.634516/page-222#post-16565208

Excellent reference, I copy pasted this to my notes file.

 

[TrollDragon]

Excellent reference, I copy pasted this to my notes file.

You have a lathe yes?

 

[Belhade]

So it screws up tight with a single 18350 in it? Was not sure about that. The info on the site where we got them said something about dual 18350's?

Yes, that wad with a single 350. But it lasted only a few hours...my 350s are like two years old, they're the ones I got with my first ZMax. So I switched over to an 18650.

 

[DPLongo22]

View attachment 495132
Dani (basic) and kabuki. They are excellent and a bonus is they are really small. Above has an 18500 in and is about the same size as a provari mini (with 18350). The pipelinepro is I think identical to the dani (apart from markings).

I LOVE the white o-rings on the 'Buki. I might have to put mine on.

 

[TrollDragon]

I LOVE the white o-rings on the 'Buki. I might have to put mine on.

These are supposed to fit the glass tank on the FeV V3 I wonder if they would work on your 'Buki's too?
https://www.rainbowloom.com/products/rubber-bands-silicone