- Status
Hey guys!
Just AWESOME!! I'm so glad you guys are really liking them! I just signed in for the first time in a while and have 28 notificationsI don't know if they're all PM's, but rest assured I'll get good replies going for you guys. The place is still a mess over here with a billion and five things to do that Really need doing, but have faith as it's cleaning up quickly. These "server' cart issues are really causing a serious blockage to the smooth motions.
So being on how thread is going...
What do you guys think? Which few should we go for?
1&2 for sure and 7. But personally I have use for them all. Match the dt with the liquid
They all look nice,,, would love to see some colored pyrex i06 tips one of these Days Issac. My Beta i06 is still going strong too by the way, these things just dont ever die, there the best dam Atty's on the market Bar none !!!
Hey folks. please email John at Theecigs... he said he would think about it (Pyrex i06... that would make my day, as i don't like the d/t for dripping; i usually take the top off to drip it...
btw, it works great on my Sgt II bottom feeder.
btw, it works great on my Sgt II bottom feeder.
I like them all and would probably purchase them all. But I agree...1, 2 and 7 for sure.
You have some funny color juice Switched ......... especially #4. I'd stay away from the green juice, it can't be good
That would be from the teet of a mama bear, num, num.
That would be from the teet of a mama bear, num, num.
Well I guess that's better than Yak Tea .................... but not by much !!!
OK Is was coming on here to talk about after 7 days, I've found the Best Atty Iv'e ever used................... But, and damn I hate buts~
The Good:
With out a dubt the most flavorful atty I've ever used. Fairly forgiving, my genaric LR 306 are more forving for me, but I've got the I06 down. 3 drops and vape, when it gets a hair dry hit I take a no volt draw and I get 2-7 more good hits. Perfect draw, I love this atty.
The not so Good:
My beta pre-vacation order of 2 HV an a LR. First HV popped after 4-5 days. LR so tight a draw my cheeks draw in like drinking a thick Shake thru a straw. Second HV dropped in a cup of water and coffee. Tried to resurrect but can only get mild vapor at 5.6V.
I bought another HV. Started with it last Sunday was Awesome for 7 1/2 days. Then this afternoon it popped too.
Now I've only been dripping for 2+ months so I'm still a little new. And I will readily accept that I could have culpability in this matter. I am conscience of what I'm doing but that might not be enough.
Priming, I've finally got that done and get thru that new atty get going process.
The LR that's too tight, even tried different devices as well as adapters.
Dropping in coffe my bad
But the 2 HV popping concerns me. I'm on a Buzz Pro, regulated voltages that tops out a 5.6v unloaded. I've learned from the polar bear (and thru my experience) I don't need a 8 second hit. I take 3-4 sec. hit with an occasional 5 second. Other than a vape-a-long with Switcher on his video I don't take 20 hits in a row.
Can this be within the normal fail rate and just got more than my share of it? Just luck off the draw? Could it be something I'm doing.
I haven't popped a LR 306 the whole time Iv'e been using them. I'm using BWB Applewood 98% of the time on all these attys.
The Real Beech is I really liked those 306's until this I06 and now the 306 just doesn't cut. I just ordered more I06's, but I need HELP or suggestions or ???????
Thanks ~ one sad Rat
The Good:
With out a dubt the most flavorful atty I've ever used. Fairly forgiving, my genaric LR 306 are more forving for me, but I've got the I06 down. 3 drops and vape, when it gets a hair dry hit I take a no volt draw and I get 2-7 more good hits. Perfect draw, I love this atty.
The not so Good:
My beta pre-vacation order of 2 HV an a LR. First HV popped after 4-5 days. LR so tight a draw my cheeks draw in like drinking a thick Shake thru a straw. Second HV dropped in a cup of water and coffee. Tried to resurrect but can only get mild vapor at 5.6V.
I bought another HV. Started with it last Sunday was Awesome for 7 1/2 days. Then this afternoon it popped too.
Now I've only been dripping for 2+ months so I'm still a little new. And I will readily accept that I could have culpability in this matter. I am conscience of what I'm doing but that might not be enough.
Priming, I've finally got that done and get thru that new atty get going process.
The LR that's too tight, even tried different devices as well as adapters.
Dropping in coffe my bad
But the 2 HV popping concerns me. I'm on a Buzz Pro, regulated voltages that tops out a 5.6v unloaded. I've learned from the polar bear (and thru my experience) I don't need a 8 second hit. I take 3-4 sec. hit with an occasional 5 second. Other than a vape-a-long with Switcher on his video I don't take 20 hits in a row.
Can this be within the normal fail rate and just got more than my share of it? Just luck off the draw? Could it be something I'm doing.
I haven't popped a LR 306 the whole time Iv'e been using them. I'm using BWB Applewood 98% of the time on all these attys.
The Real Beech is I really liked those 306's until this I06 and now the 306 just doesn't cut. I just ordered more I06's, but I need HELP or suggestions or ???????
Thanks ~ one sad Rat
hey Wharf... i got a couple LR 1.8 i06 and i've had it for a week now, on both my provari and sgt II bottom feeder now. no problems with the draw, and it bottom feeds.
feels to me like it doesn't hold much juice compared to 901 which takes more, and 510 which takes a little more... it's more of a 306 amount and i have to drip or feed it more often.
i'm using it at aprox 3.6 to 4.0v no problems.
I will eventually get to the HV but just digging this one.
My 901's normally last me a week if i am dripping only, and that's chain vaping; sometimes less.
I go through 3ml in half a day on the sgtII feeder.
I ordered more from Isaac both kinds, and am waiting on a i06DCA, and hoping Theecig.com makes a i06 pyrex d/t... i hate the d/t from iken because the hole is too narrow and nothing beats pyrex for dripping... so with it on bottomfeed, it's a breeze.
feels to me like it doesn't hold much juice compared to 901 which takes more, and 510 which takes a little more... it's more of a 306 amount and i have to drip or feed it more often.
i'm using it at aprox 3.6 to 4.0v no problems.
I will eventually get to the HV but just digging this one.
My 901's normally last me a week if i am dripping only, and that's chain vaping; sometimes less.
I go through 3ml in half a day on the sgtII feeder.
I ordered more from Isaac both kinds, and am waiting on a i06DCA, and hoping Theecig.com makes a i06 pyrex d/t... i hate the d/t from iken because the hole is too narrow and nothing beats pyrex for dripping... so with it on bottomfeed, it's a breeze.
OK Is was coming on here to talk about after 7 days, I've found the Best Atty Iv'e ever used................... But, and damn I hate buts~
The Good:
With out a dubt the most flavorful atty I've ever used. Fairly forgiving, my genaric LR 306 are more forving for me, but I've got the I06 down. 3 drops and vape, when it gets a hair dry hit I take a no volt draw and I get 2-7 more good hits. Perfect draw, I love this atty.
The not so Good:
My beta pre-vacation order of 2 HV an a LR. First HV popped after 4-5 days. LR so tight a draw my cheeks draw in like drinking a thick Shake thru a straw. Second HV dropped in a cup of water and coffee. Tried to resurrect but can only get mild vapor at 5.6V.
I bought another HV. Started with it last Sunday was Awesome for 7 1/2 days. Then this afternoon it popped too.
Now I've only been dripping for 2+ months so I'm still a little new. And I will readily accept that I could have culpability in this matter. I am conscience of what I'm doing but that might not be enough.
Priming, I've finally got that done and get thru that new atty get going process.
The LR that's too tight, even tried different devices as well as adapters.
Dropping in coffe my bad
But the 2 HV popping concerns me. I'm on a Buzz Pro, regulated voltages that tops out a 5.6v unloaded. I've learned from the polar bear (and thru my experience) I don't need a 8 second hit. I take 3-4 sec. hit with an occasional 5 second. Other than a vape-a-long with Switcher on his video I don't take 20 hits in a row.
Can this be within the normal fail rate and just got more than my share of it? Just luck off the draw? Could it be something I'm doing.
I haven't popped a LR 306 the whole time Iv'e been using them. I'm using BWB Applewood 98% of the time on all these attys.
The Real Beech is I really liked those 306's until this I06 and now the 306 just doesn't cut. I just ordered more I06's, but I need HELP or suggestions or ???????
Thanks ~ one sad Rat
Sorry to hear about your woes WR, and I don't have an explanation for them
Wrt your liquids BW applewood is a nice clear juice at 70/30 I believe and might be as low as 80/20.
Third week on my first HV IO6, not resistance change WSE, no leaking, running Great!!!
Well if it's dumb luck, it's better than me screwing things up, I think. I ordered some more last night and I'm already missing them.
My IO6 stopped working after a week of use just out of the blue quit. I am running it on a Reo Grand no flooding or dry burning it just stopped. The HV one I have is still running great.
Time to order some more : (
Time to order some more : (
Im currently on day #41 with the original Beta i06, mine is still running like the day I twisted it on my PV. In my book this says a lot and these Bad Azz Atty's are proven now. They also sure beat ones that are selling for $20ea at another place so not only are you getting a super price on these i06 Attys your getting your moneys worth in time spent vaping with them. Ya any Atty could go in a week but I think 41 days matched with what others have been saying these Iken i06 Attys are now proven winners !!!
I think this new i06 will surely be a staple in the Iken line up now and be staying on the shelf for a long time !
I think this new i06 will surely be a staple in the Iken line up now and be staying on the shelf for a long time !
Last edited:
- Status
Similar threads
