Terminator/Nautilus/Choddy/Oddy Clone Pics, Tip,Tricks and Quirks

[anavidfan]

Listen to Kwalka , really , he is a bucket of knowledge and experience. Ive learned so much from him. The COV silica is great, except that sometimes its not always available, so next best , for me at least is the one I just mentioned Jelly. All these different choices are there depending on how you vape.
But if you like to experiment, go ahead and try all the options. There is something out there that one person loves and an equal that will come out and say the dont. For me silica works great, Others swear by cotton or bamboo yarn . Im a very heavy vapor and need something that holds up under tougher conditions. But if you use high voltage/wattage with LR then you might need the Nextel.

 

[UA72Riddle]

Saw this in my youtube feed today, figured you all could benefit from it

Nice find! I just sent off an email for one....I just hope he does the follow up with the silver wire, though its probably too soft. Thanks for posting!!

 

[LucidAce]

Nice find! I just off an email for one....I just hope he does the follow up with the silver wire, though its probably too soft. Thanks for posting!!

I believe he edited the description of the video to update that it worked with the silver as well.

 

[UA72Riddle]

Thanks, just went to YouTube to look at it...and you are right. He did indeed update saying it worked! I can't wait to get one of these...going to be perfect! (As I've said, I hate twisting wires!! lol)

 

[anavidfan]

how much do those cost, been seeing that around for a little while now, and Ive heard prices of over a couple hundred.

 

[in4mati0n11]

how much do those cost, been seeing that around for a little while now, and Ive heard prices of over a couple hundred.

......... ..........

 

[j4mmin42]

I think he said something like 60 euros or pounds...but I could be wrong.

 

[comptechltd]

It works out to about $90 or so. I have sent an e-mail asking for the price with fees and shipping so we'll see.

Steve

 

[dwcraig1]

You could start selling ready wires in the classiieds

 

[comptechltd]

No kidding. It looks pretty interesting though.

Steve

 

[kwalka]

You could start selling ready wires in the classiieds

You must register as a supplier to sell on ECF. Once u reg, you lose access to classys and coops.


I must have a few of these. (Wire capacitors) Find out about a bulk buy co-op type of situation. Everyone that owns an Ody, term, naut... Will want one. Ask about 100 and 200 units. I will be all over that co-op.

 

[Underwhelmed]

You folks might want to check out this thread-
http://www.e-cigarette-forum.com/fo...095-resistance-no-resistance-wire-welder.html

If you can solder, it looks like this is a much cheaper option and should be faster than waiting on a pre-made device to be sent from Greece.

 

[UA72Riddle]

I have a disposable camera on the way...had the wife pick one up while grocery shopping...gonna give this a shot tonight.

I got an email back from him...68€ plus 8€ shipping is what he is asking for a completed unit.

Since I use 32awg and 30awg kanthal, and 30g silver NR....I don't need all of the extra settings. Should be able to copy what was done in the other thread with the camera and have one that will do the same for about $15. Lets hope....lol

 

[in4mati0n11]

Here is the link... I just bought some the other day.. http://www.e-cigarette-forum.com/fo...ick-3-mm-temperature-resistance-1000-c-2.html

This stuff ROCKS!!!!!!!!!!!!!

 

[Ictinike]

This stuff ROCKS!!!!!!!!!!!!!

in4mat,

Your going to be using this in the Oddy clone? I think we have enough time on the coop to grab some of this if indeed the 3mm is the best size and by the rave reviews doolak's is the one to get

Thanks!

 

[in4mati0n11]

in4mat,

Your going to be using this in the Oddy clone? I think we have enough time on the coop to grab some of this if indeed the 3mm is the best size and by the rave reviews doolak's is the one to get

Thanks!

I am going to be using this stuff wherever silica wick may call me... I have been using it tonight in a Fatty V2 and all I can say is wow....I love this stuff!!

To answer your question, yes... I had bought it with the intention of using it in the oddy clone.... doolak rocks and this strange looking silica does too!

 

[Underwhelmed]

I have a disposable camera on the way...had the wife pick one up while grocery shopping...gonna give this a shot tonight.

I got an email back from him...68€ plus 8€ shipping is what he is asking for a completed unit.

Since I use 32awg and 30awg kanthal, and 30g silver NR....I don't need all of the extra settings. Should be able to copy what was done in the other thread with the camera and have one that will do the same for about $15. Lets hope....lol

This is more or less my plan as well.

I'm going to try ultra cheap first though and see if they have any at Walmart in the photo lab going out for recycle.

I have no doubt that 68 euro unit is really well built, and more likely overbuilt, but it doesn't make much sense to me to spend that kind of coin ($100) for it and have to wait for it to get here if we can make one for ourselves that will do the job.

 

[in4mati0n11]

This is more or less my plan as well.

I'm going to try ultra cheap first though and see if they have any at Walmart in the photo lab going out for recycle.

I have no doubt that 68 euro unit is really well built, and more likely overbuilt, but it doesn't make much sense to me to spend that kind of coin ($100) for it and have to wait for it to get here if we can make one for ourselves that will do the job.

I 100% agree!

Any bets on who electrocutes themselves 1st??

 

[Underwhelmed]

I 100% agree!

Any bets on who electrocutes themselves 1st??

Well heck, that's half the fun.

 

[UA72Riddle]

This is more or less my plan as well.

I'm going to try ultra cheap first though and see if they have any at Walmart in the photo lab going out for recycle.

I have no doubt that 68 euro unit is really well built, and more likely overbuilt, but it doesn't make much sense to me to spend that kind of coin ($100) for it and have to wait for it to get here if we can make one for ourselves that will do the job.

My wife came back empty handed....so tomorrow I will be making a run to to Walgreens to see if they have any spent cameras left from the holidays that have already been processed.....might be able to get a free wire welder out of it!

Well...maybe not totally free, but close enough! The box and gator clips shouldn't cost too much....already have the wire I need and plenty of solder.